Tested Material Used To AD0-C102 Test Engine Exam Questions in here [Oct-2021]
Penetration testers simulate AD0-C102 exam PDF
NEW QUESTION 23
You want to configure a preset to adjust the timing of keyframes to fit the duration of the target clip. In the Save Preset dialog, which option should you select?
- A. Length
- B. Proportional
- C. Scale
- D. Duration
Answer: A
NEW QUESTION 24
You have exported an .MP4 tile with custom is settings re the H.2M codec but the Me size is too large. Which settings should you choose when exporting again to decrease the file size?
- A. Bitrate Settings > Target Bitrate. set a lower number.
- B. Effects > Video Limiter. set the File Size limit.
- C. Advanced Settings > Key Frame Distance, set to a lower number.
- D. Check Use Maximum Render Quality.
Answer: B
NEW QUESTION 25
The Timeline panel is active with multiple dips m a sequence. You press the Up arrow key while working in the Timeline and the playhead jumps to the beginning of the sequence.
Why does this happen?
- A. The clip is not selected.
- B. Snap In Timeline is disabled.
- C. Selection Follows Playhead is disabled.
- D. The oily enabled track is empty.
Answer: C
NEW QUESTION 26
You haw added and adjusted the length of a Wipe transition to the first cut in a montage.
How can you add the same translation to multiple other edit points?
- A. Select the Wipe transition, open the Elect Controls panel, copy the transition, select all the clips, and Paste.
- B. Select the other edit points and drag the Wipe transition from the Effects panel to one of them.
- C. Select the existing Wipe transition. choose Copy, select the other edit points, and Paste.
- D. Use an Adjustment layer and add the Wipe transition to it.
Answer: D
NEW QUESTION 27
You shot an interview with two separate cameras, and you notice that the colors of the two cameras do not match. How can you view both clips at the same time to make a comparison?
- A. Choose Sequence > Color Comparison View.
- B. Choose Comparison View in the Program Monitor panel.
- C. Choose Clip > Video Options > Match Frame.
- D. Choose Sequence > Reverse Match frame.
Answer: D
NEW QUESTION 28
You have restored an archived project. When you open the project you discover that the preview dies were not included m the archive. How can you re-create them?
- A. Missing preview files are automatically created when viewing the contents of clips and sequences in Adobe Premiere Pro.
- B. Render video and audio effects in sequences in the project. The preview tiles will be created.
- C. Open in Adobe Media Encoder using file > Add Premiere Pro Sequence. The preview files will be created.
- D. In the project settings, choose a location for the preview files. Adobe Premiere Pro will automatically re-create them.
Answer: D
NEW QUESTION 29
A long interview clip has been cut into shorter pieces that are now scattered among other clips in ihe timeline.
How can you ensure that changes to a Sharpen effect will affect every instance of the interview clip?
- A. Add the Sharpen effect to an adjustment layer.
- B. Add the Sharpen effect as a Track Mane effect
- C. Link the Sharpen effect settings together in the Effect Controls Panel.
- D. Add the Sharpen effect as a Master Clip effect.
Answer: C
NEW QUESTION 30
You do not have any graphic dips selected in the timeline, and you want to add a new text item. How do you do this?
- A. In the Essential Graphics panel click the plus icon (+) and choose Text.
- B. In the Graphics menu, choose New Layer > Text.
- C. In the Project panel choose New Item > Text.
- D. In the Essential Graphics panel menu, choose New Text Layer.
Answer: B
NEW QUESTION 31
In the Export Settings panel, you need to export something as a .mov (QuickTime). You see that QuickTime is a choice in the Formats dropdown menu, but find that the Presets have different choices for video codecs.
How do these choices affect the exported file?
- A. A format is a container for your dip. A codec is the way the media is encoded.
- B. A format is how the file Is framed (full-frame format) and a codec refers to the extension.
- C. A format refers to the frame size and rate, and the codec refers to the color space.
- D. A format is how the file Is compressed, and a codec refers to the extension.
Answer: A
NEW QUESTION 32
You have been given a USB microphone to record a voiceover.
How can you select the new microphone without opening the application preferences?
- A. In the Timeline panel menu, choose the USB microphone as the default input
- B. Open the Essential Sound panel and choose the USB Microphone as the input
- C. Open the Audio Clip Mixer and enable the track for recording. Choose the USB microphone.
- D. Right click the Audio Track Header > Voice-Over Record Settings > Input Choose the USB microphone.
Answer: C
NEW QUESTION 33
You have multiple voice dips o* varying levels in a sequence.
How can you quickly adjust all the clips to match a consistent level?
- A. Add the Multiband Compressor effect to all Hacks in (he Audio Track Mixer, and choose the Broadcast preset.
- B. Use the Essential Sound panel to tag dialogue clips as Dialogue and click the Loudness Auto-Match button.
- C. Select an the clips and dick Clip > Audio Options > Audio Gain > Normalize Max Peak To and enter the peak amplitude level.
- D. Add the Loudness Radar effect to all tracks In the Audio Track Mixer, and choose the appropriate Broadcast preset for the specific region.
Answer: B
NEW QUESTION 34
You want to share your sequence with other editorsso they can continue editing. You are not sure all editors ate using the same version of Adobe Premiere Pro What Type of file should you export?
- A. XML
- B. MXF
- C. ALE
- D. OMF
Answer: B
NEW QUESTION 35
You are editing in Mercury Playback Engine Software Only mode. You have used several effects that support
32-bit processing-How can you ensure. That the effects are rendered in 32-bit when exporting?
- A. Check Render at Maximum Depth.
- B. Check Render Alpha Channel Only.
- C. Use Maximum Render Quality.
- D. Choose Performance > Hardware Encoding.
Answer: C
NEW QUESTION 36
What happens if you drag one sequence into a new sequence with sequence nesting turned off in the Timeline panel?
- A. The original sequence appears in the new sequence as a multicamera source sequence.
- B. You will not be able to edit the original sequence into the new sequence.
- C. The original sequence will edit into the new sequence as a single clip.
- D. Individual clips in the original sequence will be edited into the new sequence.
Answer: C
NEW QUESTION 37
You have an edit that is at its required final duration. but you need to use a clip that is 10 frames shorter than the spate m which you want to place it in the edit. Which tool helps solve this problem?
- A. Rate Stretch Tool
- B. Ripple Edit Tool
- C. Slide Tool
- D. Slip Tool
Answer: C
NEW QUESTION 38
You have a large amount of clips with similar names in a bin. You are searching for a particular visual event.
Out you're not sure which clip or when the event occurs.
Using default settings, how can you quickly preview the contents of the clips without opening them in the Source Monitor?
- A. Set the bin to Icon view. Mold Command (macOS) / Ctrl (Windows) while moving the cursor across clip thumbnails.
- B. Set the bin to Icon view. Move the cursor across clip thumbnails without selecting them. The clip contents will be displayed.
- C. Select all the clips in the bin and drag them into the Media Browser panel. Use playback controls to preview their contents.
- D. Set the bin to Icon view. Select the clip you would line to preview. Move the cursor across the dip thumbnails to see the contents.
Answer: C
NEW QUESTION 39
You have been working in Adobe Premiere Pro on a complete multi-clipintro for a TV series.
How can you quickly turn the clips into their own sequence so you can add It to other episodes?
- A. Select the clips, and drag them to the Project panel.
- B. Select the clips. right-click and choose Nest.
- C. In and Out points and choose Sequence > Nest.
- D. Select the clips, right-dick and choose Pre-Compose.
Answer: C
NEW QUESTION 40
You want to adjust only the color of the sky of a clip m a sequence. Which tool in Adobe Premiere Pro should you use to do this?
- A. In the Lumetri Color Panel, use Hue Saturation Curves.
- B. Change the clip Blend Mode to Multiply.
- C. Apply the Leave Color Effect to the dip.
- D. In the Lumetri Color Panel, use the White Balance Selector.
Answer: D
NEW QUESTION 41
You have winged all the voice over clips in a sequence on a single track.
How can you conveniently adjust the audio level for the sequence voice over clips?
- A. Select all the clips, and adjust the rubber band for any clip that has been selected.
- B. Select all the clips, right-dick any selected dip, and choose Audio > Set Level To.
- C. In the Audio Clip Mixer, adjust the level for the track containing the voice over clips.
- D. In the Audio Track Mixer, adjust the level for the track containing the voice over dips.
Answer: C
NEW QUESTION 42
You have edited a multicamera source sequence into a large! sequence. You want to view the footage from multiple cameras simultaneously. How do you enable Multi-Camera editing in the Program Monitor?
- A. Select the Multi-Camera view button located on the Source Monitor Button Bar.
- B. Choose View > Program Monitor > Multi-Camera.
- C. Click the Program Monitor Settings icon and choose Multi-Camera.
- D. Choose Multi-Camera view from the Program Monitor panel menu.
Answer: A
NEW QUESTION 43
You have made some changes to the export settings and want to create these settings as an Export preset. How should you do this?
- A. Choose Import Into Project in Export Settings.
- B. Click Save Changes as a Preset in Export Settings
- C. Click the Save Preset button In Export Settings.
- D. Choose Save Preset In the Export Settings panel menu.
Answer: B
Explanation:
Explanation
https://helpx.adobe.com/lightroom-classic/help/export-presets-settings-plug-ins.html
NEW QUESTION 44
You have created a project that includes several elements you expect to use in future projects. What is the most efficient way to save time when creating similar projects?
- A. Save a full quality rendered output of every sequence so you can incorporate elements in future projects.
- B. Select the clips and sequences you want to include. Choose File > Save As > Template Project.;
- C. Save a copy with (he media you expect to re-use in a single folder and use it as a template project
- D. Note the media elements you found most useful and keep a record of any important effects and settings.
Answer: B
NEW QUESTION 45
......
Authentic Best resources for AD0-C102 Online Practice Exam: https://www.examcost.com/AD0-C102-practice-exam.html
