Pass HP HPE6-A73 PDF Dumps | Recently Updated 124 Questions
Updated Test Engine to Practice HPE6-A73 Dumps & Practice Exam
Passing the HP HPE6-A73 exam is a requirement for obtaining the Aruba Certified Switching Professional (ACSP) certification. Aruba Certified Switching Professional Exam certification is recognized globally and is highly respected in the IT industry. It is a valuable asset for IT professionals who wish to advance their careers in the field of networking and switching. Candidates who pass the exam will be able to demonstrate their proficiency in Aruba switching and will be well-equipped to handle complex network environments.
HP HPE6-A73: Aruba Certified Switching Professional exam is a certification that validates the candidate's skills in configuring and troubleshooting complex enterprise-level Aruba switching solutions. Aruba Certified Switching Professional Exam certification is designed for network professionals who aspire to enhance their knowledge and skills in configuring, implementing, and managing Aruba switches in complex networks.
The HP HPE6-A73 exam covers a wide range of topics such as ArubaOS-CX configuration and management, VLANs and trunking, link aggregation, spanning tree protocols, and advanced switching technologies like Virtual Switching Framework (VSF) and Intelligent Resilient Framework (IRF). The HPE6-A73 certification exam provides the necessary skills and knowledge to configure and troubleshoot Aruba switching solutions, making it an essential certification for IT professionals working in medium to large-scale enterprise networks.
NEW QUESTION # 14
A network administrator is implementing a configuration plan in NetEdit The administrator used NetEdit to push the configuration plan to the switch. Which option in the NetEdit planning section should the administrator select to save the configuration running on the switch to the startup-config?
- A. VALIDATE
- B. EDIT
- C. DEPLOY
- D. COMMIT
Answer: D
NEW QUESTION # 15
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.
The solution leverages a third-party AAA solution. The company is replacing existing access switches withAOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies forboth wired and wireless traffic.
Which solution should the company implement?
- A. Downloadable user roles
- B. RADIUS dynamic authorization
- C. IPSec
- D. User-based tunneling
Answer: B
NEW QUESTION # 16
An administrator is concerned about the security of the control plane connection between an AOS-CX switch and an ArubaMobility Controller (MC) when implementing user-based tunneling How should the administrator protect this traffic?
- A. IPSec with a pre-shared key
- B. PAPI with an MD5 pre-shared key
- C. IPSec with a digital certificate
- D. GRE with a pre-shared Key
Answer: B
NEW QUESTION # 17
Examine the attached exhibit.
The network administrators is trying to add a remote location as area 3 to the network shown in the diagram.
Based on current connection restrictions, the administrator cannot connect area 3 directly to area 0. The network is using AOS-CX switches.
Which feature should the administrator implement to provide connectivity to the remote location?
- A. Bidirectional forward detection (BFD)
- B. OSPFv3
- C. Virtual links
- D. Not-so-stubby areas
Answer: C
NEW QUESTION # 18
Examine the configuration performed on newly deployed AOS-CX switches:
After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?
- A. Create and assign a local user role to the ports
- B. Enable change of authorization (CoA)
- C. Set the ports to client-mode
- D. Define the server group cppm
Answer: B
NEW QUESTION # 19
An administrator has an AOS-CX switch configured with:
router ospf 1
area 0
area 1 stub no-summary
It is the only ABR for area 1. The switch has the appropriate adjacencies to routing switches in areas 0 and 1.
The current routes in each area are:
Area 0: 5 routes (LSA Type 1 and 2)
Area 1: 10 routes (LSA Type 1 and 2)
External routes: 2 (LSA Type 5)
Based on the above configuration, how many OSPF routes will routing switches see in Area 1?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 20
An administrator is implementing a downloadable user role solution involving AOS-CX switches. The AAA solution and theAOS-CX switches can successfully authenticate users: however the role information fails todownload to the switches. Whatpolicy should be added to an intermediate firewall to allow the downloadable role function to succeed?
- A. Allow UDP 8211
- B. Allow UDP 1811
- C. Allow TCP 443
- D. Allow TCP 22
Answer: C
NEW QUESTION # 21
An administrator will be implementing tunneling between AOS-CX switches and Aruba gateways. Which list of protocols must minimally be allowed by an intermediate firewall between two sets of devices?
- A. UDP 8211 and IP protocol 47
- B. UDP 4500 and IP protocol 47
- C. UDP 4500 and UDP 8209
- D. IP protocol 50 and UDP 8209
Answer: A
Explanation:
ACSP Study Guide Page 788 - Allow the following protocols/ports
- PAPI: UDP 8211
- GRE: Protocoll 47
NEW QUESTION # 22
A company has a third-party AAA server solution. The campus access layer was just upgraded to AOS-CX switches that perform access control with MAC-Auth and 802.1X. The company has an Aruba Mobility Controller (MC) solution for wireless, and they want to leverage the firewall policies on the controllers for the wired traffic.
What is correct about how the company should implement a security solution where the wired traffic is processed by the MCs?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement standards-based RADIUS VSAs to pass policy information directly to the AOS-CX switches and MCs
- B. Implement downloadable user roles with a gateway role defined on the AOS-CX switches
- C. Implement downloadable user roles with a device role defined on the AOS-CX switches and MCs
- D. Implement local user roles with a gateway role defined on the AOS-CX switches
Answer: D
NEW QUESTION # 23
Examine the network exhibit.
A network administrator is implementing OSPF on a VSX pair of aggregation switches: Agg1 and Agg2. VLANs 10 and 20 are connected to layer-2 access switches. Agg-1 and Agg-2 are configured as the default gateway for VLANs 10 and 20, with active gateway enabled.
What is the best practice for configuring OSPF on the aggregation switches and their connection to the Core switch?
- A. Define separate layer-3 VLAN interfaces between the aggregation and core switches. Enable active gateway for the Layer-3 VLAN.
- B. Define a layer-2 VSX LAG associated with a layer-3 VLAN interface. Enable active forwarding for the Layer-3 VLAN.
- C. Define separate layer-3 VLAN interfaces between the aggregation and core switches. Enable active forwarding for the Layer-3 VLAN.
- D. Define a layer-2 VSX LAG associated with a layer-3 VLAN interface. Enable active gateway for the Layer-3 VLAN.
Answer: D
NEW QUESTION # 24
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding IoT traffic?
- A. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
- B. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
- C. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
- D. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch
Answer: B
NEW QUESTION # 25
Which protocols are used by NetEdit to interact with third-party devices? (Choose two.)
- A. Restful API
- B. SSH
- C. telnet
- D. SNMP
- E. CDP
Answer: B,D
NEW QUESTION # 26
A network engineer is having a problem adding a custom-written script to an AOS-CX switch's NAE GUI.
The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch:
What should the engineer perform to fix this issue?
- A. Enable trust settings for the AOS-CX switch's SSL certificate
- B. Install the script's signature before installing the new script
- C. Remove a script that is no longer used before installing the new script
- D. Ensure the engineer's desktop and the AOS-CX switch are synchronized to the same NTP server
Answer: C
NEW QUESTION # 27
A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time. The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?
- A. Ensure the engineer's PC is synchronized to the same NTP server as the AOS-CX switch
- B. Ensure the engineer's web browser is configured for the same timezone as the AOS-CX switch
- C. Enable trust settings for the AOS-CX switch's SSL certificate
- D. Ensure NetEdit and the AOS-CX switch are synchronized to the same NTP server
Answer: D
NEW QUESTION # 28
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as primary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?
- A. Local optimization was not enabled on the VSX LAG
- B. The VSX LAG hash does not match the remote peer
- C. The VSX LAG interfaces are in layer-3 mode
- D. LACP was enabled in active mode on the VSX LAG
Answer: B
NEW QUESTION # 29
......
HP HPE6-A73 Dumps Cover Real Exam Questions: https://www.examcost.com/HPE6-A73-practice-exam.html
Dumps Collection HPE6-A73 Test Engine Dumps Training With 124 Questions: https://drive.google.com/open?id=1BPp8lA3LLegXmCaAdDgSKptoZ2VOKnZU
