Latest [Nov 08, 2021] 100% Passing Guarantee - Brilliant MD-100 Exam Questions PDF
MD-100 Certification – Valid Exam Dumps Questions Study Guide! (Updated 300 Questions)
NEW QUESTION 160
You have a computer that runs Windows 10.
You can start the computer but cannot sign in.
You need to start the computer into the Windows Recovery Environment (WinRE).
What should you do?
- A. Turn off the computer. Turn on the computer, and then press F8.
- B. Turn off the computer. Turn on the computer, and then press F10.
- C. From the sign-in screen, hold the Shift key, and then click Restart.
- D. Hold Alt+Ctrl+Delete for 10 seconds.
Answer: C
Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/windows-recovery-environment--windows-re--technical-reference
NEW QUESTION 161
You enable Windows PowerShell remoting on a computer that runs Windows 10.
You need to limit which PowerShell cmdlets can be used in a remote session.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
NEW QUESTION 162
You have a computer named Computer1 that runs Windows 10.
You need to configure User Account Control (UAC) to prompt administrators for their credentials.
Which settings should you modify?
- A. Security Options in Local Group Policy Editor
- B. Administrators Properties in Local Users and Groups
- C. User Account Control Settings in Control Panel
- D. User Rights Assignment in Local Group Policy Editor
Answer: A
Explanation:
References:
https://docs.microsoft.com/en-us/windows/security/identity-protection/user-account-control/user-account-control-security-policy-settings
NEW QUESTION 163
Your network contains an Active directory domain. The domain contains 1,000 computers that run Windows
10.
You need to prevent computers of the research department from appearing in network in File Explorer.
What should you do?
- A. Turn off network discovery
- B. Disable the Network List Service
- C. Modify the %systemroot%system32\drivers\etc\Network ile
- D. Configure DNS to use an external provider
Answer: D
NEW QUESTION 164
Your network contains an Active Directory domain. The domain contains a user named User1.
User1 creates a Microsoft account.
User1 needs to sign in to cloud resources by using the Microsoft account without being prompted for credentials.
Which settings should User1 configure?
- A. Email & app accounts in the Settings app
- B. Users in Computer Management
- C. User Accounts in Control Panel
- D. Users in Active Directory Users and Computers
Answer: A
Explanation:
Explanation/Reference:
Explanation:
Open the Setting app, select Accounts then select Email and accounts. Here you can add accounts for the cloud resources and configure the login credentials for the accounts. If you configure the accounts with the login credentials of the Microsoft account, you won't be prompted for credentials when you open the apps.
References:
https://support.microsoft.com/en-za/help/4028195/microsoft-account-how-to-sign-in Manage Devices and Data Testlet 1 Case Study This is a case study. Case studies are not timed separately. You can use as much exam times as you would like to complete each case. However, there may be additional studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. When you are ready to answer a question, click the Question button to return to the question.
Overview
Existing Environment
Fabrikam, Inc. is a distribution company that has 500 employees and 100 contractors.
Active Directory
The network contains an Active Directory forest named fabrikam.com. The forest is synced to Microsoft Azure Active Directory (Azure AD). All the employees are assigned Microsoft 365 E3 licenses.
The domain contains a user account for an employee named User10.
Client Computers
All the employees have computers that run Windows 10 Enterprise. All the computers are installed without Volume License Keys. Windows 10 license keys are never issued.
All the employees register their computer to Azure AD when they first receive the computer.
User10 has a computer named Computer10.
All the contractors have their own computer that runs Windows 10. None of the computers are joined to Azure AD.
Operational Procedures
Fabrikam has the following operational procedures:
* Updates are deployed by using Windows Update for Business.
* When new contractors are hired, administrators must help the contactors configure the following settings on their computer:
- User certificates
- Browser security and proxy settings
- Wireless network connection settings
Security policies
The following security policies are enforced on all the client computers in the domain:
* All the computers are encrypted by using BitLocker Drive Encryption (BitLocker). BitLocker recovery information is stored in Active Directory and Azure AD.
* The local Administrators group on each computer contains an enabled account named LocalAdmin.
* The LocalAdmin account is managed by using Local Administrator Password Solution (LAPS).
Problem Statements
Fabrikam identifies the following issues:
* Employees in the finance department use an application named Application1. Application1 frequently crashes due to a memory error. When Application1 crashes, an event is written to the application log and an administrator runs a script to delete the temporary files and restart the application.
* When employees attempt to connect to the network from their home computer, they often cannot establish a VPN connection because of misconfigured VPN settings.
* An employee has a computer named Computer11. Computer11 has a hardware failure that prevents the computer from connecting to the network.
* User10 reports that Computer10 is not activated.
Technical requirements
Fabrikam identifies the following technical requirements for managing the client computers:
* Provide employees with a configuration file to configure their VPN connection.
* Use the minimum amount of administrative effort to implement the technical requirements.
* Identify which employees' computers are noncompliant with the Windows Update baseline of the company.
* Ensure that the service desk uses Quick Assist to take remote control of an employee's desktop during support calls.
* Automate the configuration of the contractors' computers. The solution must provide a configuration file that the contractors can open from a Microsoft SharePoint site to apply the required configurations.
NEW QUESTION 165
You have a computer named Computer1 that runs Windows 7. Computer1 has a local user named User1 who has a customized profile.
On Computer1, you perform a clean installation of Windows 10 without formatting the drives.
You need to migrate the settings of User1 from Windows7 to Windows 10.
Which two actions should you perform? To answer, drag the appropriate actions to the correct targets. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/windows/deployment/usmt/usmt-how-it-works
NEW QUESTION 166
You need to meet the technical requirements for the helpdesk users.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
References:
https://www.itprotoday.com/compute-engines/what-group-policy-creator-owners-group
NEW QUESTION 167
Your network contains an Active Directory domain that contains the objects shown in the following table.
Computer1 contains the shared folders shown in the following table.
The computers have the network configurations shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Box 1: Yes
User1 is in Group1 which has permission to access the share so the share will be visible.
Box 2: No
User2 is in Group2 which does not have permission to access Share1. Access-based enumeration is enabled so Share1 will not be listed as User2 does not have permission to access it.
Box 3: No
Share2$ is a hidden share (dollar sign appended) so the share will never be listed.
NEW QUESTION 168
You are a network administrator at your company.
A user attempts to start a computer and receives the following error message: "Bootmgr is missing." You need to resolve the issue.
You start the computer in the recovery mode.
Which command should you run next? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://neosmart.net/wiki/bootmgr-is-missing/
NEW QUESTION 169
You have a computer named Computer1 that runs Windows 10.
The relevant services on Computer1 are shown in the following table.
Which service will start after you restart Computer1?
- A. Service 1, Setvice2. and Services
- B. Service3 and Services only
- C. Service2, Services, and Service6
- D. Services only
Answer: C
Explanation:
Service1 cannot start because it is dependent on Service3 which is disabled.
Service2 will start because it is set to Automatic. Service2 starting will cause Service6 to start.
Service3 will not start because it is disabled.
Service4 will not start because it is disabled.
Service5 will start because it is set to Automatic and is not dependent on any other services.
Service6 will start because Service2 is dependent on Service6.
NEW QUESTION 170
Your network contains an Active Directory domain that is synced to a Microsoft Azure Active Directory (Azure AD) tenant.
Your company purchases a Microsoft 365 subscription.
You need to migrate the Documents folder of users to Microsoft OneDrive for Business.
What should you configure?
- A. Folder Redirection Group Policy settings
- B. Enterprise State Roaming
- C. One Drive Group Policy settings
- D. roaming user profiles
Answer: C
Explanation:
References:
https://docs.microsoft.com/en-us/onedrive/redirect-known-folders?redirectSourcePath=%252fen-us%
252farticle%252fredirect-windows-known-folders-to-onedrive-e1b3963c-7c6c-4694-9f2f-fb8005d9ef12
NEW QUESTION 171
You have 10 computers that run Windows 10 and have BitLocker Drive Encryption (BitLocker) enabled.
You plan to update the firmware of the computers.
You need to ensure that you are not prompted for the BitLocker recovery key on the next restart. The drive must be protected by BitLocker on subsequent restarts.
Which cmdlet should you run?
- A. Disable-BitLocker
- B. Add-BitLockerKeyProtector
- C. Unlock-BitLocker
- D. Suspend-BitLocker
Answer: D
Explanation:
Explanation
References:
https://support.microsoft.com/en-us/help/4057282/bitlocker-recovery-key-prompt-after-surface-uefi-tpm-firmwa
NEW QUESTION 172
You have a computer that runs Windows 10. You view the domain services status as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Device is Azure AD joined; not domain joined.
The MDM URLs in the exhibit indicate the device is enrolled in Intune.
References:
https://docs.microsoft.com/en-us/azure/active-directory/devices/troubleshoot-device-dsregcmd
https://github.com/MicrosoftLearning/MD-101T00-ManagingModernDesktops/blob/master/Instructions/Labs/0
NEW QUESTION 173
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a computer named Computer1 that runs Windows 10.
A service named Application1 is configured as shown in the exhibit.
You discover that a user used the Service1 account to sign in to Computer1 and deleted some files.
You need to ensure that the identity used by Application1 cannot be used by a user to sign in to sign in to the desktop on Computer1. The solution must use the principle of least privilege.
Solution: On Computer1, you assign Service1 the deny log on as a service user right.
Does this meet the goal?
- A. No
- B. Yes
Answer: B
Explanation:
References:
https://docs.microsoft.com/en-us/windows/security/threat-protection/security-policy-settings/deny-log-on-as-a-service
NEW QUESTION 174
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your password, place your cursor in the Enter password box and click on the password below.
Username: Contoso/Administrator
Password: Passw0rd!
The following information is for technical support purposes only:
Lab Instance: 10921597
You need to ensure that you can successfully ping DC1 from Client3 by using the IP4 address of DC1.
To complete this task, sign in to the required computer or computers.
Answer:
Explanation:
See explanation below.
* On Client3, press Windows+R to access Run.
* Type cmd and click OK to access the command prompt.
* Type ipconfig and press Enter to check that you have a valid IP address.
* On Client3, press Windows+R to access Run.
* Type cmd and click OK to access the command prompt.
* Type "ping" and the IP address of the Domain Controller (e.g. "ping 172.16.1.43").
Reference:
http://www.turn-n-burn.com/DestinyNetworks/Downloads/WebHelp3-1-1/Ping_the_Domain_Controller.h
NEW QUESTION 175
You have 100 computers that run Windows 10 and are members of an Active Directory domain.
Two support technicians named Tech1 and Tech2 will be responsible for monitoring the performance of the computers.
You need to configure the computers to meet the following requirements:
Ensure that Tech1 can create and manage Data Collector Sets (DCSs).
Ensure that Tech2 can start and stop the DCSs.
Use the principle of least privilege.
To which group should you add each technician? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/windows/security/identity-protection/access-control/active-directory-security-groups
NEW QUESTION 176
Your network contains an Active Directory domain. the domain contains a computer named Computer1 that runs Windows 10. The domain contains the users shown in the following table.
Computer contains the shared folders shown in the following table.
The shared folders have the permissions shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Box 1: No
Share1$ is a hidden share (dollar sign appended) so the share will never be visible.
Box 2: Yes
User2 is in Group1 and Group2. Both groups have access to Share1$. Therefore, the contents of the shared folder will be visible.
Box 3: No
User1 is in Group1. Group1 does not have the necessary security permission to access Share2. You need both security permissions (NTFS permissions) AND share permissions to view the contents of a shared folder. User1 has the necessary share permissions (Everyone: Read), but not the security permission.
NEW QUESTION 177
You have 10 computers that run Windows 10 and have BitLocker Drive Encryption (BitLocker) enabled.
You plan to update the firmware of the computers.
You need to ensure that you are not prompted for the BitLocker recovery key on the next restart. The drive must be protected by BitLocker on subsequent restarts.
Which cmdlet should you run?
- A. Disable-BitLocker
- B. Add-BitLockerKeyProtector
- C. Unlock-BitLocker
- D. Suspend-BitLocker
Answer: D
Explanation:
Explanation
References:
https://support.microsoft.com/en-us/help/4057282/bitlocker-recovery-key-prompt-after-surface-uefi-tpm-firmw
NEW QUESTION 178
......
How to book the MD-100 Exam
These are following steps for registering the MD-100 exam. Step 1: Visit to Microsoft Exam Registration Step 2: Signup/Login to MICROSOFT account Step 3: Search for MICROSOFT MD-100 Certifications Exam Step 4: Select Date and Center of examination and confirm with payment value of $165
Career Opportunities
The Microsoft MD-100 exam is a qualifying test for the Microsoft 365 Certified: Modern Desktop Administrator Associate certification. To fulfill the second requirement for getting this certificate, the candidates must pass Microsoft MD-101: Managing Modern Desktops. After obtaining this associate-level certification, the applicants can explore many career opportunities. Some of the job titles that these certified professionals can apply for include a System Administrator, an IT System Administrator, a Senior Systems Administrator, a Desktop Design Administrator, a Technology Integration Specialist, a Server Administrator, a Microsoft Office 365 System Administrator, and a Senior Desktop Engineer. The average salary associated with these roles is $98,000 per annum. You should note that the actual remuneration that you earn with your certificate will depend on some other variables. Your current experience level, position, and your company will determine how much you will get per year.
MD-100 are Available for Instant Access: https://www.examcost.com/MD-100-practice-exam.html
MD-100 Dumps 2021 - New Microsoft MD-100 Exam Questions: https://drive.google.com/open?id=1nj7yagD0zF_CxzTo-xTaw8c-SYNmy2wT
