JN0-104 PDF Dumps Real 2023 Recently Updated Questions
Released Juniper JN0-104 Updated Questions PDF
NEW QUESTION # 27
You successfully established a BGP session with peer, but do not see any routes learned from the peer, What would cause this problem?
- A. A routing policy is blocking BGP from learning the routes
- B. The firewall filter is blocking the BGP from learning the routes
- C. Unicast reverse-path-forwarding is blocking BGP from learning the routes
- D. A security policy is blocking BGP from learning the routes
Answer: A
NEW QUESTION # 28
Which command causes the Junos OS to temporarily activate a configuration?
- A. commit and-quite
- B. commit confirmed
- C. commit check
- D. commit synchronize
Answer: B
NEW QUESTION # 29
Which command allows you to view the raw packet data of interface ge-1/0/5?
- A. show interface ge-1/0/5 extensive
- B. monitor traffic interface ge-1/0/5
- C. show interface ge-1/0/5 media
- D. monitor interface traffic ge-1/0/5
Answer: B
NEW QUESTION # 30
Which of these constitutes the forwarding plane?
- A. PFE
- B. Routing table
- C. Forwarding table
- D. RE
Answer: A
NEW QUESTION # 31
Which command configures an address of 192.168.1.1 with a mask of 255.255.255.0 on interface ge-0/0/0?
- A. set interface ge-0/0/0 ip4 address 192.168.1.1 mask 255.255.255.0
- B. set ip interface ge-0/0/0 address 192.168.1.1 255.255.255.0
- C. set interfaces ge-0/0/0 unit 0 family inet address 192.168.1.1/24
- D. set ip interface ge-0/0/0 address 192.168.1.1/24
Answer: C
NEW QUESTION # 32
Click the Exhibit button
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The HTTP traffic destined to 172.19.20.50 is accepted.
- B. All other traffic from the Web destined to 172.19.20.50 is discarded
- C. The HTTP traffic from source 172.19.20.50 is accepted.
- D. All other traffic from the Web destined to 172.19.20.50 is accepted.
Answer: A,B
NEW QUESTION # 33
Refer to Exhibit:
Which parameter at the end of the command would provide information for troubleshooting pusposes?
- A. No-resolve
- B. No-timestamp
- C. Print-ascii
- D. Extensive
Answer: D
NEW QUESTION # 34
Click the Exhibit button
You are capturing logs to troubleshoot an issue with IS-IS; however, the logs are increasing in size too quickly.
Referring to the exhibit, which configuration statement would solve this problem?
- A. set protocols isis traceoptions file files 10
- B. delete protocols isis traceoptions file is-is-logs.log
- C. delete protocols isis traceoptions flag normal
- D. set protocols isis traceoptions flag hello detail
Answer: D
NEW QUESTION # 35
What is responsible for processing multicast transit traffic?
- A. PFE
- B. Control plane
- C. RE
- D. Management plane
Answer: A
NEW QUESTION # 36
Which output displays that the peer has been selected for NTP synchronization?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: C
NEW QUESTION # 37
Which operational command allows viewing of only OSPF routes?
- A. show route protocol ospf
- B. show ospf table
- C. show ip route protocol ospf
- D. show ip ospf route
Answer: A
NEW QUESTION # 38
What are two modes of unicast reverse path forwarding? (Choose two.)
- A. Loose
- B. Low
- C. Strict
- D. High
Answer: A,C
NEW QUESTION # 39
You are considering an upgrade from 19.1R1 and want to ensure that only bug fixes are included.
Which two software versions should you consider in this situation? (Choose two.)
- A. 19.3R1-S1
- B. 19.1R3
- C. 19.3R2
- D. 19.1R1-S2
Answer: B,D
NEW QUESTION # 40
Which command can be used to view the messages seen during the last system boot?
- A. show messages
- B. show chassis messages
- C. show boot messages
- D. show system boot-messages
Answer: D
NEW QUESTION # 41
Which parameter of the monitor traffic command should be used with caution when considering storage space on a Junos device?
- A. detail
- B. write-file
- C. layer2-headers
- D. extensive
Answer: B
NEW QUESTION # 42
In your configuration, an interface contains multiple IP addresses belonging to the same subnet. You want to identify the IP address to use for packets sent to hosts on the same subnet.
Which parameter would you use to accomplish this task?
- A. patch
- B. primary
- C. relative
- D. preferred
Answer: D
NEW QUESTION # 43
Which layer of the TCP/IP model is tasked with delivering packets to the destination?
- A. Transport Layer
- B. Application Layer
- C. Internet Layer
- D. Network Layer
Answer: C
NEW QUESTION # 44
Click the Exhibit button
What is the next-hop interface for traffic destined to 172.19.52.101 as shown in the exhibit?
- A. ge-0/0/1.0
- B. ge-0/0/3.0
- C. ge-0/0/2.0
- D. ge-0/0/0.0
Answer: A
NEW QUESTION # 45
Which two statements are correct regarding logical units on Junos devices? (Choose two.)
- A. Logical unit numbers must match the DLCI or VCI numbers configured on the interfac
- B. Logical unit 0 is the only value allowed on interfaces running HDLC or PPP encapsulations.
- C. Logical units are always required for any interface configured with logical addresses such as IPv4 and IPv6.
- D. Ethernet interfaces can be configured to use any logical unit number, regardless of whether 802.1Q VLAN tagging is enabled.
Answer: B,C
NEW QUESTION # 46
Which two statements about firewall filters are correct? (Choose two.)
- A. An input filter is used to control routes that are accepted by the local routing table
- B. An output filter is used to control outgoing traffic on a specific interface
- C. An input filter is used to control incoming traffic on a specific interface
- D. An output filter determines the routes in the local routing table that are advertised to peers
Answer: B,C
Explanation:
Ref: Stateless Firewall Filter Overview | Junos OS | Juniper Networks
"Stateless Firewall Filter Overview
...
Data Packet Flow Control
To control the flow of data packets transiting the device as the packets are being forwarded from a source to a destination, you can apply stateless firewall filters to the input or output of the router's or switch's physical interfaces.
..."
[edit]
user@router#
NEW QUESTION # 47
......
JN0-104 Dumps and Practice Test (145 Exam Questions): https://www.examcost.com/JN0-104-practice-exam.html
Guide (New 2023) Actual Juniper JN0-104 Exam Questions: https://drive.google.com/open?id=1a7HVo5uoX7DwCd_rwHzdKzCUvNLtLPXJ
