Get Oct-2023 Dumps to Pass your 300-710 Exam with 100% Real Questions and Answers
Updated Exam 300-710 Dumps with New Questions
NEW QUESTION # 42
A Cisco FTD has two physical interfaces assigned to a BVI. Each interface is connected to a different VLAN on the same switch. Which firewall mode is the Cisco FTD set up to support?
- A. active/active failover
- B. high availability clustering
- C. routed
- D. transparent
Answer: C
NEW QUESTION # 43
An engineer is troubleshooting a device that cannot connect to a web server. The connection is initiated from the Cisco FTD inside interface and attempting to reach 10.0.1.100 over the non-standard port of 9443 The host the engineer is attempting the connection from is at the IP address of 10.20.10.20. In order to determine what is happening to the packets on the network, the engineer decides to use the FTD packet capture tool Which capture configuration should be used to gather the information needed to troubleshoot this issue?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: C
NEW QUESTION # 44
Refer to the exhibit.
An administrator is looking at some of the reporting capabilities for Cisco Firepower and noticed this section of the Network Risk report showing a lot of SSL activity that cloud be used for evasion. Which action will mitigate this risk?
- A. Use Cisco AMP for Endpoints to block all SSL connection
- B. Use encrypted traffic analytics to detect attacks
- C. Use SSL decryption to analyze the packets.
- D. Use Cisco Tetration to track SSL connections to servers.
Answer: C
NEW QUESTION # 45
When creating a report template, how can the results be limited to show only the activity of a specific subnet?
- A. Select IP Address as the X-Axis in each section of the report.
- B. Add an Input Parameter in the Advanced Settings of the report, and set the type to Network/IP.
- C. Create a custom search in Firepower Management Center and select it in each section of the report.
- D. Add a Table View section to the report with the Search field defined as the network in CIDR format.
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/FireSIGHT-System-UserGuide-v5401/Reports.html#87267
NEW QUESTION # 46
Refer to the exhibit.
An administrator is looking at some of the reporting capabilities for Cisco Firepower and noticed this section of the Network Risk report showing a lot of SSL activity that cloud be used for evasion. Which action will mitigate this risk?
- A. Use Cisco AMP for Endpoints to block all SSL connection
- B. Use encrypted traffic analytics to detect attacks
- C. Use SSL decryption to analyze the packets.
- D. Use Cisco Tetration to track SSL connections to servers.
Answer: C
NEW QUESTION # 47
Refer to the exhibit.
An organization has an access control rule with the intention of sending all social media traffic for inspection After using the rule for some time, the administrator notices that the traffic is not being inspected, but is being automatically allowed What must be done to address this issue?
- A. Change the intrusion policy to connectivity over security.
- B. Add the social network URLs to the block list
- C. Modify the selected application within the rule
- D. Modify the rule action from trust to allow
Answer: C
NEW QUESTION # 48
A security engineer must configure a Cisco FTD appliance to inspect traffic coming from the internet. The Internet traffic will be mirrored from the Cisco Catalyst 9300 Switch. Which configuration accomplishes the task?
- A. Set the firewall mode to routed.
- B. Set interface configuration mode to none.
- C. Set interface configuration mode to passive.
- D. Set the firewall mode to transparent.
Answer: C
NEW QUESTION # 49
A network administrator configured a NAT policy that translates a public IP address to an internal web server IP address. An access policy has also been created that allows any source to reach the public IP address on port
80. The web server is still not reachable from the Internet on port 80. Which configuration change is needed?
- A. The access policy must allow traffic to the internal web server IP address.
- B. The NAT policy must be modified to translate the source IP address as well as destination IP address.
- C. The intrusion policy must be disabled for port 80.
- D. The access policy rule must be configured for the action trust.
Answer: A
NEW QUESTION # 50
An engineer is working on a LAN switch and has noticed that its network connection to the mime Cisco IPS has gone down Upon troubleshooting it is determined that the switch is working as expected What must have been implemented for this failure to occur?
- A. The upstream router has a misconfigured routing protocol
- B. The Cisco IPS is configured in detection mode
- C. Link-state propagation is enabled
- D. The Cisco IPS has been configured to be in fail-open mode
Answer: B
NEW QUESTION # 51
Within an organization's high availability environment where both firewalls are passing traffic, traffic must be segmented based on which department it is destined for. Each department is situated on a different LAN. What must be configured to meet these requirements?
- A. span EtherChannel clustering
- B. multi-instance firewalls
- C. redundant interfaces
- D. high availability active/standby firewalls
Answer: B
NEW QUESTION # 52
A network engineer sets up a secondary Cisco MC that is integrated with Cisco Security Packet Analyzer What occurs when the secondary Cisco MC synchronizes with the primary Cisco FMC?
- A. The secondary Cisco FMC must be reintegrated with the Cisco Security Packet Analyzer after the synchronization
- B. The existing integration configuration is replicated to the primary Cisco FMC
- C. The synchronization between the primary and secondary Cisco FMC fails
- D. The existing configuration for integration of the secondary Cisco FMC the Cisco Security Packet Analyzer is overwritten.
Answer: D
NEW QUESTION # 53
A network engineer is configuring URL Filtering on Firepower Threat Defense. Which two port requirements on the Firepower Management Center must be validated to allow communication with the cloud service?
(Choose two.)
- A. outbound port TCP/443
- B. inbound port TCP/80
- C. outbound port TCP/8080
- D. inbound port TCP/443
- E. outbound port TCP/80
Answer: A,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Securit
NEW QUESTION # 54
An engineer must investigate a connectivity issue and decides to use the packet capture feature on Cisco FTD. The goal is to see the real packet going through the Cisco FTD device and see the Snort detection actions as a part of the output. After the capture-traffic command is issued, only the packets are displayed. Which action resolves this issue?
- A. Perform the trace within the Cisco FMC GUI instead of the Cisco FTD CLI.
- B. Use the capture command and specify the trace option to get the required information.
- C. Specify the trace using the -T option after the capture-traffic command.
- D. Use the verbose option as a part of the capture-traffic command
Answer: D
NEW QUESTION # 55
An organization is installing a new Cisco FTD appliance in the network. An engineer is tasked with configuring access between two network segments within the same IP subnet. Which step is needed to accomplish this task?
- A. Assign an IP address to the Bridge Virtual Interface.
- B. Add a separate bridge group for each segment.
- C. Specify a name for the bridge group.
- D. Permit BPDU packets to prevent loops.
Answer: A
NEW QUESTION # 56
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. Cisco Firepower gives recommendations to update the policies.
- B. The administrator requests a Remediation Recommendation Report from Cisco Firepower
- C. Cisco Firepower automatically updates the policies.
- D. The administrator manually updates the policies.
Answer: A
Explanation:
Explanation
Ref:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailori
NEW QUESTION # 57
Which two statements about deleting and re-adding a device to Cisco FMC are true? (Choose two.)
- A. The Cisco FMC web interface prompts users to re-apply access control policies.
- B. No option to delete and re-add a device is available in the Cisco FMC web interface.
- C. Before re-adding the device in Cisco FMC, you must add the manager back in the device.
- D. An option to re-apply NAT and VPN policies during registration is available, so users do not need to re- apply the policies after registration is completed.
- E. No option to re-apply NAT and VPN policies during registration is available, so users need to re-apply the policies after registration is completed.
Answer: A,E
NEW QUESTION # 58
While configuring FTD, a network engineer wants to ensure that traffic passing through the appliance does not require routing or Vlan rewriting. Which interface mode should the engineer implement to accomplish this task?
- A. transparent
- B. passive
- C. Inline tap
- D. Inline set
Answer: A
NEW QUESTION # 59
Which command must be run to generate troubleshooting files on an FTD?
- A. show tech-support
- B. sudo sf_troubleshoot.pl
- C. system generate-troubleshoot all
- D. system support view-files
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technote- SourceFire-00.html
NEW QUESTION # 60
In a multi-tenant deployment where multiple domains are in use. which update should be applied outside of the Global Domain?
- A. minor upgrade
- B. local import of major upgrade
- C. local import of intrusion rules
- D. Cisco Geolocation Database
Answer: D
NEW QUESTION # 61
What is the benefit of selecting the trace option for packet capture?
- A. The option indicates whether the packet was dropped or successful.
- B. The option limits the number of packets that are captured.
- C. The option indicated whether the destination host responds through a different path.
- D. The option captures details of each packet.
Answer: B
NEW QUESTION # 62
Drag and drop the configuration steps from the left into the sequence on the right to enable external authentication on Cisco FMC to a RADIUS server.
Answer:
Explanation:
Explanation
4, 1, 2, 3
NEW QUESTION # 63
An engineer is troubleshooting HTTP traffic to a web server using the packet capture tool on Cisco FMC.
When reviewing the captures, the engineer notices that there are a lot of packets that are not sourced from or destined to the web server being captured. How can the engineer reduce the strain of capturing packets for irrelevant traffic on the Cisco FTD device?
- A. Use the -c option to restrict the packet capture to only the first 100 packets.
- B. Use the host filter in the packet capture to capture traffic to or from a specific host.
- C. Redirect the packet capture output to a. pcap file that can be opened with Wireshark.
- D. Use an access-list within the packet capture to permit only HTTP traffic to and from the web server.
Answer: B
NEW QUESTION # 64
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
- A. ECMP with up to three equal cost paths across a single interface
- B. BGPv4 in transparent firewall mode
- C. BGPv6
- D. ECMP with up to three equal cost paths across multiple interfaces
- E. BGPv4 with nonstop forwarding
Answer: A,C
NEW QUESTION # 65
An analyst is investigating a potentially compromised endpoint within the network and pulls a host report for the endpoint in question to collect metrics and documentation. What information should be taken from this report for the investigation?
- A. client applications by user, web applications, and user connections
- B. threat detections over time and application protocols transferring malware
- C. number of attacked machines, sources of the attack, and traffic patterns
- D. intrusion events, host connections, and user sessions
Answer: A
NEW QUESTION # 66
......
Cisco 300-710 (Securing Networks with Cisco Firepower) certification exam is designed for IT professionals who specialize in network security and are responsible for implementing and managing network security solutions using Cisco Firepower Next Generation Firewall (NGFW), as well as Cisco Firepower Management Center (FMC). 300-710 exam tests candidates' knowledge and skills in deploying and configuring Cisco Firepower NGFW, implementing security policies using FMC, and troubleshooting Firepower deployments.
100% Pass Guarantee for 300-710 Exam Dumps with Actual Exam Questions: https://www.examcost.com/300-710-practice-exam.html
Today Updated 300-710 Exam Dumps Actual Questions: https://drive.google.com/open?id=1s-PinGiNjRFut5x3zmK_N3kgIOaAHW6k
