Get Nov-2024 Dumps to Pass your LEED-AP-ND Exam with 100% Real Questions and Answers
Updated Exam LEED-AP-ND Dumps with New Questions
NEW QUESTION # 31
In a LEED for Neighborhood Development project, in order to earn one point for Innovation Credit. LEED Accredited Professional, the individual must have which accreditation?
- A. LEED AP with any specialty credential
- B. Any LEED AP without specialty credential
- C. LEED AP Building Design and Construction
- D. LEED AP Neighborhood Development
Answer: D
Explanation:
To earn one point under theInnovation Credit: LEED Accredited Professional (AP)in a LEED for Neighborhood Development (ND) project, the individual must hold theLEED AP Neighborhood Development (LEED AP ND)credential. This credential signifies that the individual has specialized knowledge in the principles and processes specific to neighborhood development and sustainability, aligning directly with the requirements and intent of LEED ND.
* Option A: LEED AP Neighborhood Developmentis the correct answer because to earn this specific credit in a LEED ND project, the LEED AP must hold theNeighborhood Development (ND)specialty.
This ensures that the individual's expertise is aligned with the specific challenges and opportunities in neighborhood development, rather than other building-focused specialties (Reference:LEED v4 ND Reference Guide).
* Option B: LEED AP Building Design and Constructionwould not qualify for this credit in a LEED ND project, as it focuses on the building level rather than neighborhood-scale development.
* Option C: Any LEED AP without specialty credentialis not sufficient for the Innovation Credit.
LEED requires a specialty credential related to the specific project type (in this case, Neighborhood Development).
* Option D: LEED AP with any specialty credentialis also incorrect because LEED ND specifically requires theNeighborhood Developmentspecialty for this credit, not just any specialty.
Thus, the correct answer isA. LEED AP Neighborhood Development.
NEW QUESTION # 32
A mixed-use LEED for Neighborhood Development project includes a 20,000 ft2 (1.858 m2) office building with retail space on the first floor. There are 1.000 ft7 (93 m2) surface parking lots located on each of Ihe four sides of the budding.
Who! improvement is needed to make the plan eligible for Neighborhood Pattern and Design Credit. Reduced Parking Footprint?
- A. Reduce the parking square footage by 500 ft2 (46 m2) on each side of the building
- B. Combine all surface parking into a single parking lot in front of the building
- C. Remove the surface parking lot in front of the building
- D. Provide secure site lighting for all automobile parking
Answer: C
Explanation:
To be eligible for the Neighborhood Pattern and Design (NPD) Credit for Reduced Parking Footprint, a project must minimize the amount of land dedicated to parking. Specifically, this credit discourages parking lots located in front of buildings, as they detract from the walkability and pedestrian-friendly environment that LEED ND encourages. By removing the surface parking lot in front of the building, the project can improve its walkability, reduce the parking footprint, and better align with the credit requirements.
References:
* LEED v4 for Neighborhood Development, Current Version
* LEED Reference Guide for Neighborhood Development
NEW QUESTION # 33
A 10-acre ((our hectare) project has 5.000 ft (1 524 m) of sidewalks Trees and trellises are planned along several ofthose blocks to provide shading for the sidewalks In order to achieve Neighborhood Pattern and Design Credit Tree-Lined and Shaded Streetscapes. what is the minimum shaded sidewalk that would need to be provided?
- A. 1,000 ft. (305 m)
- B. 4,000 ft. (1 220 m)
- C. 2,000 ft. (610 m)
- D. 3,000 ft. (915 m)
Answer: D
Explanation:
To achieve the Neighborhood Pattern and Design Credit for Tree-Lined and Shaded Streetscapes, a minimum of 60% of the total sidewalk length must be shaded within ten years of landscape installation. For a project with 5,000 feet (1,524 meters) of sidewalks, 60% equates to 3,000 feet (915 meters) of shaded sidewalk. This requirement encourages the development of pedestrian-friendly environments that provide comfort and reduce the urban heat island effect, contributing to the sustainability and livability of the neighborhood.
NEW QUESTION # 34
The LEED for Neighborhood Development project learn is tabulating the potential number of points. What is the maximum number of points the team can earn through Regional Priority credits?
- A. Four points
- B. Six points
- C. Two points
- D. Eight points
Answer: A
Explanation:
In LEED for Neighborhood Development, the maximum number of points that a project team can earn through Regional Priority credits is four. Regional Priority credits are designed to address geographically specific environmental, social, and public health priorities.
* Regional Priority Credits:LEED-ND offers Regional Priority credits to encourage project teams to focus on regional environmental issues. These credits are identified by USGBC based on specific local priorities and challenges, such as water scarcity, air quality, or habitat protection.
* Point Allocation:A project can earn up to four Regional Priority points. These points are awarded in addition to the points earned for achieving the underlying credits that have been identified as regional priorities. The total number of Regional Priority points achievable does not exceed four, regardless of how many regional priority credits a project may be eligible for.
* Geographic Relevance:The credits eligible for Regional Priority points vary depending on the project's location. USGBC provides a list of Regional Priority credits based on the project's ZIP code or similar geographic identifier.
* The LEED Reference Guide for Neighborhood Development provides detailed instructions on how to identify and achieve Regional Priority credits.
* TheLEED v4 Neighborhood Developmentdocumentation outlines the process for determining which credits are eligible as Regional Priority credits based on location.
Detailed Explanation:References:For more comprehensive details, consult:
* LEED Reference Guide for Neighborhood Development
* LEED v4 Neighborhood Development
NEW QUESTION # 35
Which of thefollowing can be Included as non-buildable land?
- A. Drainage ponds
- B. Existing water Bodies
- C. Farmland
- D. Voluntarily set aside neighborhood park
Answer: B
Explanation:
Existing water bodies can be included as non-buildable land. Non-buildable land refers to areas where development is restricted due to natural features, environmental regulations, or other constraints that prevent construction. Existing water bodies, such as lakes, rivers, or ponds, naturally limit the possibility of development and are therefore classified as non-buildable. This designation helps protect natural resources and contributes to the sustainability and ecological health of the project site.
NEW QUESTION # 36
As defined by the Minimum Program Requirements, theLEED project boundary includes the
- A. land and water area that is reviewed for certification
- B. aggregate of parcels within the project controlled by the project developer
- C. project area minus the nonbuildable square footage associated with the protect
- D. total land area of a protect site bordering previously developed parcels.
Answer: A
NEW QUESTION # 37
Which of the following strategies is a best practice for reducing a project's development footprint?
- A. Provide parking under or within a building structure
- B. Increase the number of cul-de-sacs throughout the site
- C. increase the amount of impervious area on-site
- D. Implement a construction erosion and sedimentation control plan
Answer: A
Explanation:
Reducing a project's development footprint is critical for minimizing environmental impact, particularly in terms of land use and site development. Providing parking under or within a building structure is considered a best practice because it reduces the amount of land required for parking, thereby conserving open space and reducing impervious surfaces. This strategy alignswith LEED's goals of minimizing the environmental footprint of development projects. Increasing impervious areas or the number of cul-de-sacs would have the opposite effect, leading to more extensive land disturbance and potential environmental degradation.
NEW QUESTION # 38
Which of the following can be considered a previously undeveloped slle?
- A. An area of 8 acres (0.61 hectare), with a previously developed building footprint totaling 4 acres (2 hectares)
- B. An area of 0.8 acre (0.32 hectare), with a previously developed building footprint totaling 0.2 acre (0 .
08 hectare) - C. An area of 10 acres (4 hectares), with a previously developed building footprint totaling 8 acres (3 hectares)
- D. An area of 0.5 acre (0.20 hectare) that is an improved park with manicured landscaping and paved playground areas
Answer: D
Explanation:
In LEED terminology, a previously undeveloped site is one that has not been significantly altered by human activity, such as by construction or paving. An improved park with manicured landscaping and paved playground areas would be considered previously developed because it has been altered from its natural state.
The other options, involving areas with substantial building footprints, also indicate previously developed land. Therefore, the area described in option D, despite being relatively small, is the correct choice as it reflects human alteration of the land, making it a developed site.
NEW QUESTION # 39
What factor determines the percentage of undeveloped land that must remain undisturbed for Green Infrastructure and Buildings Credit. Minimized Site Disturbance?
- A. intersections per square mile
- B. Covenants, conditions, and restrictions
- C. City land development codes
- D. Density of the project
Answer: D
Explanation:
The percentage of undeveloped land that must remain undisturbed for the Green Infrastructure and Buildings Credit on Minimized Site Disturbance is determined by the density of the project. Higher-density projects are generally permitted to disturb a greater portion of the land because they use the land more efficiently, while lower-density projects must preserve more undeveloped land to minimize the environmental impact. LEED encourages high-density development as a means to preserve open spaces and reduce sprawl, which directly influences the required percentage of land that must remain undisturbed.
References:
* LEED v4 Neighborhood Development Guide: This guide details the requirements for minimizing site disturbance, explaining how project density affects the percentage of land that must remain undisturbed (USGBC, LEED v4 Neighborhood Development Current Version).
* LEED Reference Guide for Neighborhood Development: Provides the rationale behind varying land disturbance allowances based on project density (USGBC, LEED Reference Guide for Neighborhood Development).
NEW QUESTION # 40
A project includes previously developed lotswithin the LEED for Neighborhood Development boundary. For the purpose ofcalculating previously developed site area, which lot size may be consideredto be 100% previously developed?
- A. 1.5 acres (0.61 hectare)
- B. 2 acres (0.81 hectare)
- C. 2.5 acres (1.01 hectare)
- D. 0.5 acre (0.2 hectare)
Answer: D
Explanation:
For the purpose of calculating previously developed site area in LEED for Neighborhood Development, lots that are fully covered with existing buildings, hardscapes, or other impervious surfaces are considered 100% previously developed. Smaller lots, such as the 0.5 acre option, are often fully developed, making them eligible to be classified as 100% previously developed under LEED ND guidelines.
References:
* LEED v4 Neighborhood Development Guide: This document specifies how to determine and calculate previously developed land for LEED certification (USGBC, LEED v4 Neighborhood Development Current Version).
* LEED Reference Guide for Neighborhood Development: Provides detailed guidance on how to categorize and calculate site areas for credits related to previously developed lands (USGBC, LEED Reference Guide for Neighborhood Development).
NEW QUESTION # 41
Which strategies meet the requirements tor Neighborhood Pattern and Design Credit. Transportation Demand Management?
- A. Obtain a variance to allow a 25% reduction from local regulatory minimum parking requirements
- B. Ensure that 50% of the residential units and non-residential building enhances ore within a t/4mi(0.4 km) walking distance of a shared vehicle
- C. Subsidize yearly transportation passes by at least 50% for 100% of the occupants ofthe project for a minimum ofthree years
- D. Sell or rent associated parking spaces separately from 50% ofdwelling units and/or nonresidential square
Answer: C
Explanation:
TheNeighborhood Pattern and Design (NPD) Credit: Transportation Demand Management (TDM) encourages the implementation of strategies to reduce the reliance on single-occupancy vehicles and promote alternative, more sustainable modes of transportation. This credit aims to decrease vehicle miles traveled (VMT), reduce traffic congestion, and lower greenhouse gas emissions by encouraging the use of public transportation, car-sharing, cycling, and walking.
* Option C: Subsidize yearly transportation passes by at least 50% for 100% of the occupants of the project for a minimum of three yearsis the correct answer because subsidizing public transportation passes for all occupants encourages the use of transit, which directly reduces vehicle usage. LEED specifically recognizes this strategy as a way to reduce transportation demand by making public transit more accessible and affordable for residents and workers, aligning with the goals of the TDM credit (Reference:LEED v4 ND Reference Guide).
* Option A: Obtain a variance to allow a 25% reduction from local regulatory minimum parking requirementsis not sufficient on its own to meet the TDM credit requirements, although reducing parking can contribute to overall demand management efforts.
* Option B: Sell or rent associated parking spaces separately from 50% of dwelling units and/or nonresidential square footageis a parking management strategy that can reduce the demand for parking, but it does not fully satisfy the intent of the TDM credit by itself.
* Option D: Ensure that 50% of the residential units and non-residential buildings are within a 1/4 mi (0.4 km) walking distance of a shared vehicleis an effective TDM strategy, but the subsidized transportation passes (Option C) are a more direct and impactful strategy to reduce transportation demand.
Thus,subsidizing yearly transportation passesis the most direct and impactful strategy for meeting the Transportation Demand Management credit in LEED ND, makingOption Cthe correct answer.
NEW QUESTION # 42
For a 100% previously developed site, which of the following steps should the project team take during the Initial stages of planning to meet the requirements of Smart Location and Linkage Prerequisite. Imperiled Species and Ecological Communities Conservation?
- A. Work with a qualified biologist to restore ecological communities, using only native plants on at least
10% of the development footprint - B. Create conservation easements to prepare for the possibility that threatened or endangered species are found after the site plan has been approved
- C. Consult with the state Natural Heritage Program and state fish and wildlife agencies to determine if there are any threatened or endangered species on the site.
- D. Take minimum precautions A 100% previously developed site meets the requirements
Answer: C
Explanation:
Even for a 100% previously developed site, it is essential to assess the presence of any threatened or endangered species before proceeding with development. The Smart Location and Linkage Prerequisite for Imperiled Species and Ecological Communities Conservation requires the project team to consult with relevant state and local agencies, such as the state Natural Heritage Program and state fish and wildlife agencies. This consultation is necessary to determine if any threatened or endangered species are present on the site. If such species are found, appropriate measures must be taken to protect them, even on previously developed sites.
References:
* LEED v4 Neighborhood Development Guide: Discusses the requirements for protecting imperiled species and ecological communities, even on previously developed sites (USGBC, LEED v4 Neighborhood Development Current Version).
* LEED Reference Guide for Neighborhood Development: Provides specific instructions on consulting with environmental agencies to meet the prerequisite requirements (USGBC, LEED Reference Guide for Neighborhood Development).
NEW QUESTION # 43
A LEEDV for Neighborhood Development registeredproject is planning on using airconditioning condensate tor flushing toilets in all new buildings. WhatLEED Prerequisite or creditwill this design help achieve?
- A. GIB Credit Wastewater Management
- B. GIB Credit indoor Water Use Reduction
- C. Credit Outdoor Water Use Reduction
- D. GIB Credit Rainwater Management
Answer: B
Explanation:
Using air conditioning condensate for flushing toilets in all new buildings directly contributes to reducing indoor potable water use, which is the focus of the Green Infrastructure and Buildings (GIB) Credit for Indoor Water Use Reduction. This credit encourages the use of alternative water sources, such as air conditioning condensate, to minimize the consumption of potable water for non-potable uses. By implementing this strategy, the project can demonstrate significant reductions in potable water use, thereby helping to achieve the credit.
References:
* LEED v4 Neighborhood Development Guide: The guide outlines the criteria for the Indoor Water Use Reduction credit, including the use of alternative water sources like condensate (USGBC, LEED v4 Neighborhood Development Current Version).
* LEED Reference Guide for Neighborhood Development: Provides detailed guidance on achieving the Indoor Water Use Reduction credit through the use of innovative water management techniques (USGBC, LEED Reference Guide for Neighborhood Development).
NEW QUESTION # 44
A mixed-use development's total building area is 1.742.400 ft1 (161 874 m2) with 350 planned dwelling units Within a 1/2 mi. (08 km) walking distance are 20 diverse uses totaling 550.000 ft2 (51 096 m2) and 375 full- time jobs.
To achieve Smart Location and Linkage Credit. Housing and Jobs Proximity, what is the minimum areaof the residential component ofthe project?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 45
A LEED tot Neighborhood Development project team may need to contact or use reference materials from the
U.S. Environmental Protection Agency of local equivalency outside the US. Regarding.
- A. designations of uniqueor prime soil types
- B. floodplain standards
- C. brownfield locations and designations.
- D. locating a community supported agricultureprogram
Answer: C
Explanation:
A LEED for Neighborhood Development project team may need to contact or use reference materials from the U.S. Environmental Protection Agency (EPA) or a local equivalent outside the U.S. regarding brownfield locations and designations. Brownfields are sites previously used for industrial or certain commercial purposes and may be contaminated by hazardous substances, pollutants, or contaminants.
* Brownfield Redevelopment:LEED-ND encourages the redevelopment of brownfield sites as a sustainable practice. Redeveloping such sites helps in remediating environmental contamination and allows for the reuse of land within existing urban areas, which can reduce the pressure on undeveloped greenfield sites.
* EPA and Local Equivalents:The U.S. EPA provides guidelines, standards, and resources for identifying, assessing,and remediating brownfield sites. In countries outside the U.S., local agencies may perform similar roles, establishing regulations and providing information necessary for the safe redevelopment of these areas.
* Credit Application:To qualify for credits related to brownfield redevelopment under LEED-ND, the project team must verify the site's designation as a brownfield and follow appropriate remediation strategies as outlined by the EPA or its local equivalent. This ensures that the project contributes to environmental restoration and meets public health standards.
* The LEED Reference Guide for Neighborhood Development outlines the criteria for brownfield redevelopment and the necessary documentation to support credit applications.
* TheLEED v4 Neighborhood Developmentdocumentation provides further details on brownfield sites and their importance in sustainable urban development.
Detailed Explanation:References:For more comprehensive guidance, consult:
* LEED Reference Guide for Neighborhood Development
* LEED v4 Neighborhood Development
NEW QUESTION # 46
For a LEED forNeighborhood Development project thathas yet to earn all land use entitlements, which of thefollowing should the project team pursue to assist with local approvals?
- A. LEED for Neighborhood Development: Plan. Letter of Support
- B. Site visit by a GBCI representative
- C. LEED Plaque
- D. Endorsement from local USGBC chapter
Answer: A
Explanation:
When a LEED for Neighborhood Development project has not yet secured all land use entitlements, one effective strategy to assist with local approvals is to pursue a "LEED for Neighborhood Development: Plan" designation. As part of this process, the project team can seek a Letter of Support from the USGBC or another relevant authority. This letter serves as a formal endorsement of the project's sustainability goals and alignment with LEED ND principles, which can be persuasive in negotiations with local authorities and stakeholders. It demonstrates a commitment to sustainable development, which can help to secure the necessary approvals.
References:
* LEED v4 for Neighborhood Development, Current Version
* LEED Reference Guide for Neighborhood Development
NEW QUESTION # 47
What does the Simpson Diversity Index, as used in LEED for Neighborhood Development, measure?
- A. Diversity of community services
- B. Income diversity
- C. Diversity of housing affordability
- D. Diversity of housing types
Answer: D
Explanation:
The Simpson Diversity Index, as applied in LEED for Neighborhood Development, measures the diversity of housing types within a neighborhood. This index is used to assess how varied the housing options are in a community, promoting a mix of housing types to accommodate different household sizes and income levels.
A higher diversity of housing types contributes to a more inclusive community, which is a key goal in sustainable neighborhood development. This diversity helps in creating neighborhoods that are adaptable to various socio-economic groups and enhances community resilience.
NEW QUESTION # 48
A local zoning code limits density on a residentially-zoned 10-acre (four hectare) parcel to 65 total units The site la outside ofwalking distance to transit service.Howcould this project be eligible for Neighborhood Pattern and Design Prerequisite Compact Development?
- A. Include a recreation building with a development footprint of at least 1.5 acres (0.6 hectare)
- B. Place 15% of the total land area in private roads and streets
- C. Include 15% of the total land area as a protected community open space easement
- D. Dedicate 10% of the total land area as a public park
Answer: C
Explanation:
For a project to be eligible for the Neighborhood Pattern and Design Prerequisite on Compact Development, particularly when dealing with density limits, setting aside a portion of the land as a protected community open space easement can help meet the prerequisite requirements. By dedicating 15% of the total land area as protected open space, the project demonstrates a commitment to sustainable land use and enhances community amenities, which aligns with the LEED ND goals. This approach can help to balance density with green space, even in areas where transit service is limited.
References:
* LEED v4 for Neighborhood Development, Current Version
* LEED Reference Guide for Neighborhood Development
NEW QUESTION # 49
Aneighborhood project pursuing LEED for Neighborhood Development certification has 10 existing single family homes and is planning to construct 25 new single family homes Which of the following is Hue in order for the project to comply with GIBc Minimum Building Energy Performance?
- A. 90% of all 35 new and existing homes must show a 5% improvement over ANSI/ASHRAE/IESNA Standard 90 1 -2010
- B. 90% of all 25 new homes must show a 2% improvement over ANSI/ASH RABIESNA Standard 00.1-
2010 - C. 90% of Jill now homes must meet the requirements of LEED for Homos v4 Minimum Energy Performance prerequisite
- D. GlBc Minimum Building Energy Performance does not apply to single family homes
Answer: C
Explanation:
For the Neighborhood Pattern and Design Credit concerning Minimum Building Energy Performance (GIBc), the requirement is that 90% of all new homes (in this case, the 25 new homes) must meet the requirements of the LEED for Homes v4 Minimum Energy Performance prerequisite. This ensures that the new homes are designed and constructed to be energy-efficient, reducing overall energy consumption and greenhouse gas emissions. The option of applying the ASHRAE Standard 90.1-2010 does not apply to single-family homes under LEED ND; instead, the LEED for Homes rating system is used for residential projects.
NEW QUESTION # 50
......
100% Pass Guarantee for LEED-AP-ND Exam Dumps with Actual Exam Questions: https://www.examcost.com/LEED-AP-ND-practice-exam.html
Today Updated LEED-AP-ND Exam Dumps Actual Questions: https://drive.google.com/open?id=1OVmVJ3hP_F_AY000AftZAldh2WdhnFv5
