Feb-2024 Pass IBM S1000-007 Exam in First Attempt Easily
Free S1000-007 Exam Files Downloaded Instantly 100% Dumps & Practice Exam
IBM S1000-007 exam covers a wide range of topics related to IBM AIX v7 administration, including installation, configuration, networking, security, and performance optimization. S1000-007 exam is designed to test the candidate's knowledge and skills in these areas and to ensure that they have a deep understanding of the IBM AIX operating system. S1000-007 exam is also designed to test the candidate's ability to troubleshoot common issues that arise in IBM AIX environments.
IBM S1000-007 exam is a multiple-choice exam that consists of 62 questions. Candidates will have 90 minutes to complete the exam, and they must achieve a passing score of 64% to earn the certification. S1000-007 exam is available in English, Japanese, and Chinese.
NEW QUESTION # 14
A system administrator needs to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). After connecting to the HMC using SSH, which command should the administrator run to open a console?
- A. mlcvterm
- B. mkrep
- C. oem_setup_env
- D. mJcvdev
Answer: A
Explanation:
The mlcvterm command is used to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). According to the IBM AIX v7 Administrator Specialty Study Guide, the mlcvterm command allows you to open a terminal window to the console of a logical partition (LPAR) running AIX.
NEW QUESTION # 15
An administrator has configured NFS export in the /etc/exports file. Based on the following output, with which permissions has the /tmp directory been exported?
- A. no permissions
- B. read-write permissions
- C. read-only permissions
- D. write-only permissions
Answer: B
NEW QUESTION # 16
What are three states a device can have when connected to an AIX system?
- A. Suspended
- B. Running
- C. Stopped
- D. Available
- E. Blocked
- F. Defined
Answer: C,D,F
Explanation:
Explanation
Devices that are connected to the system can be in one of four states.
Devices that are connected to the system can be in one of the following states:
Item
Description
Undefined
The device is unknown to the system.
Defined
Specific information about the device is recorded in the customized database, but it is unavailable to the system.
Available
A defined device is coupled to the operating system, or the defined device is configured.
Stopped
The device is unavailable but remains known by its device driver.
If a tty device and a printer alternately use the same tty connector, both a tty device and a printer are defined on the same parent and port in the device configuration database. Only one of these devices can be configured at a time. When the tty connector is configured, the printer specific setup information is retained until it is configured again. The device is not removed; it is in the defined state. Maintaining adevice in defined state retains customized information for a device that is not currently in use, either before it is first made available or while it is temporarily removed from the system.
If a device driver exists for a device, the device can be made available through the device driver.
https://www.ibm.com/docs/en/aix/7.2?topic=nodes-device-states
NEW QUESTION # 17
Which AIX command displays the types, counts, and percentages of LPAR memory?
- A. Ivmo -a -v rootvg
- B. mpstat -w 1
- C. iostat
- D. vmstat -v
Answer: D
Explanation:
The vmstat command is used to display the types, counts, and percentages of LPAR memory. The -v flag is used to display the virtual memory statistics, including the types and counts of memory. Reference: IBM AIX v7 Administrator Specialty Study Guide (page 6-17).
NEW QUESTION # 18
Which AIX command displays the types, counts, and percentages of LPAR memory?
- A. Ivmo -a -v rootvg
- B. mpstat -w 1
- C. iostat
- D. vmstat -v
Answer: A
NEW QUESTION # 19
What is a benefit of using mksysb to backup a system?
- A. The image contains a backup of all application and user data.
- B. The image contains a backup of all file systems.
- C. The image can be used to restore the rootvg volume group of the system.
- D. The image contains a backup of all volume groups and logical volumes.
Answer: A
NEW QUESTION # 20
A client is running multiple AIX, IBM i and Linux partitions on an IBM Power E980 system. Which command allows the administrator to check the number of processors, amount of memory, and list the devices on the AIX partition?
- A. Iparstat -i
- B. prtconf
- C. syssnap -gc
- D. lsdev
Answer: B
Explanation:
This command displays system configuration information, including the number of processors, amount of memory, and list of devices on the AIX partition. This command is part of the AIX Operating System, and is documented in the IBM AIX v7 Administrator Specialty Study Guide. More information on this command can be found at https://www.ibm.com/support/knowledgecenter/en/ssw_aix_72/com.ibm.aix.cmds3/prtconf.htm.
NEW QUESTION # 21
What command is used to monitor SAN I/O performance/throughput?
- A. vmstat -i 1
- B. mpstat -w 1
- C. iostat -DIRT 60 10
- D. ioo -L
Answer: C
NEW QUESTION # 22
What is a benefit of using mksysb to backup a system?
- A. The image can be used to restore the rootvg volume group of the system.
- B. The image contains a backup of all application and user data.
- C. The image contains a backup of all file systems.
- D. The image contains a backup of all volume groups and logical volumes.
Answer: A
Explanation:
The mksysb command is used to create a backup image of an AIX system. This image contains a backup of the rootvg volume group of the system, which includes all the operating system files, configuration files and installed applications. This is documented in the IBM AIX v7 Administrator Specialty Study Guide. More information on this can be found at https://www.ibm.com/support/knowledgecenter/en/ssw_aix_72/com.ibm.aix.cmds3/mksysb.htm.
NEW QUESTION # 23
When the system boots it stops and displays reference code 551. This reference code means the rootvg will not varyon. What is the best way for the administrator to proceed?
- A. Perform a maintenance mode boot of AIX and diagnose/fix the problem.
- B. Reinstall AIX or restore from a mksysb.
- C. Perform a debug boot of AIX and diagnose/fix the problem.
- D. Restart the system.
Answer: A
NEW QUESTION # 24
When configuring an LPAR profile, what is the meaning of CPU Entitlement?
- A. the number of logical CPUs allocated to an LPAR
- B. Simultaneous Multi Threading setting of an LPAR
- C. the amount of guaranteed CPU time allocated to an LPAR
- D. the count of virtual CPUs configured on an LPAR
Answer: B
NEW QUESTION # 25
What is the effect of running the mount -a command?
- A. All file systems defined to the system are mounted
- B. All automatic file systems are mounted.
- C. Ail file systems set to mount=true are mounted.
- D. All JFS/JFS2 file systems are mounted.
Answer: A
Explanation:
This command is used to mount all file systems defined in the /etc/filesystems file, as well as any file systems that have the mount=true attribute set in the /etc/filesystems file. According to the IBM AIX v7 Administrator Specialty Study Guide, "the mount -a command mounts all file systems specified in the /etc/filesystems file, including file systems with the mount=true parameter set. The mount -a command is normally issued at system startup or when a new file system is added to the system."
NEW QUESTION # 26
A system administrator has noticed that static routes are missing after rebooting a system. What is the most likely reason for this?
- A. The administrator has failed to run the cfgmgr command before rebooting the systems.
- B. The administrator has failed to configure the routes in the lo0 device with the chdev command.
- C. The administrator has failed to configure the routes with the route add command.
- D. The administrator has failed to configure the routes in the inet0 device with the chdev command.
Answer: A
Explanation:
The administrator has failed to run the cfgmgr command before rebooting the systems. Running the cfgmgr command before rebooting a system is important, as it ensures that any changes made to the configuration are written to the system, otherwise the changes may be lost when the system is rebooted. Other commands such as chdev and route add are not related to this issue and will not solve the problem.
For more information on the cfgmgr command, please refer to the IBM AIX v7 Administrator Specialty Study Guide, page 10-7. The guide can be found here: https://www.ibm.com/support/knowledgecenter/en/ssw_aix_72/cfgmgmt/cfgmgr_command.htm.
NEW QUESTION # 27
An administrator checks the IBM Fix Level Recommendation Tool (FLRT) for their system to see if they need to update IBM firmware or software.
The tool asks for their current system firmware level. How can the administrator confirm what it is?
- A. run lsattr -1 firmware0
- B. run lscfg -vl sys0
- C. run lsmcode -A
- D. run lsattr -El sys0 Igrep mcode
Answer: C
Explanation:
According to the IBM AIX v7 Administrator Specialty Study Guide, the lsmcode command is used to list the microcode of the system. The -A flag is used to list the microcode level and the active microcode level of the system. This command can be used to confirm the system firmware level which is required to use the IBM Fix Level Recommendation Tool (FLRT).
NEW QUESTION # 28
The administrator of an AIX NIM client system has accidentally removed the /etc/niminfo file. Which method is used to rebuild the /etc/niminfo file?
- A. Use the nimclient command on the AIX client system to rebuild the /etc/niminfo file.
- B. Use the rep command on the AIX client system to copy the /etc/niminfo file from the NIM master.
- C. Use the nimclient command to restore the /etc/niminfo file from the most recent mksysb backup image.
- D. Use the niminit command on the AIX client system to rebuild the /etc/niminfo file.
Answer: D
Explanation:
The niminit command can be used to rebuild the /etc/niminfo file on an AIX NIM client system if it has been accidentally deleted. This command will read the NIM database on the NIM master and generate the /etc/niminfo file accordingly. Reference: IBM AIX v7 Administrator Specialty Study Guide.
NEW QUESTION # 29
A system administrator needs to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). After connecting to the HMC using SSH, which command should the administrator run to open a console?
- A. mlcvterm
- B. mkrep
- C. oem_setup_env
- D. mJcvdev
Answer: A
NEW QUESTION # 30
While executing the following extendvg command, the system administrator receives the following error:
The administrator used the chvg -t command to fix the error.
What is the implication of running this command?
- A. It reduces the maximum number of files allowed within that volume group.
- B. It reduces the maximum file size allowed within that volume group.
- C. It reduces the maximum number of physical volumes allowed within that volume group.
- D. It reduces the maximum number of logical volumes allowed within that volume group.
Answer: C
Explanation:
The chvg command with the -t option is used to reduce the maximum number of physical volumes (PVs) allowed in a volume group (VG). This is necessary when the number of PVs in a VG exceeds the maximum allowed. Reference: IBM AIX v7 Administration Specialty Study Guide (section 10.3.3, pp. 641-642).
NEW QUESTION # 31
Which user account is always UID 0 on AIX?
- A. root
- B. admin
- C. system
- D. bin
Answer: A
Explanation:
Explanation
The root account is the special user in the /etc/passwd file with the user ID (UID) of 0 and is commonly given the user name, root. It is not the user name that makes the root account so special, but the UID value of 0. This means that any user that has a UID of 0 also has the same privileges as the root user. Also, the root account is always authenticated by means of the local security files.
https://www.ibm.com/docs/en/aix/7.2?topic=passwords-root-account
NEW QUESTION # 32
An IT security department would like to limit root user access to only members of the group called system. Which command will accomplish this?
- A. chgroup admin=root system
- B. chadmin group=system root
- C. chadmin user=root system
- D. cruiser sugroups=system root
Answer: B
Explanation:
The "chadmin" command can be used to modify the attributes of a user account, including the groups that the user belongs to. The syntax for limiting root user access to members of the group called "system" would be:
sql
chadmin group=system root
This command will add the root user to the "system" group and remove it from any other groups. Members of the "system" group will be the only ones able to access the root account.
NEW QUESTION # 33
......
Free Exam Updates S1000-007 dumps with test Engine Practice: https://www.examcost.com/S1000-007-practice-exam.html
Updated Verified S1000-007 dumps Q&As - 100% Pass Guaranteed: https://drive.google.com/open?id=1F4Nkbn5DqcQSHSKmcglT8o76uGL0cSPH
