350-501 Exam Practice Questions prepared by Cisco Professionals
Use Valid New 350-501 Questions - Top choice Help You Gain Success
Cisco 350-501 exam is designed for professionals who want to enhance their knowledge and skills in implementing and operating Cisco Service Provider Network Core Technologies. 350-501 exam is part of the CCNP Service Provider certification track and focuses on the core technologies that service providers use to deliver high-quality services to their customers.
Assurance and Automation: 15%
- Describing model-driven telemetry as well as data analytics in the service provider;
- Explaining programmable APIs utilized to add Cisco devices in the network automation;
- Designing and verifying IPFIX/NetFlow, SNMP, RESTCONF, and NETCONF;
- Describing the high-level principles and advantages of the data modeling language;
- Specifying the purpose of Network Services Orchestration;
- Defining the external script to configure Cisco devices with the usage of REST API;
- Comparing the agentless vs. agent configuration management tools (SaltStack, Chef, Ansible, and Puppet);
NEW QUESTION # 65
Refer to the exhibit:
An engineer is preparing to implement link aggregation configuration.
Which statement al about this configuration is true?
- A. The switch port actively sends packets to negotiate an EtherChannel using PAgP
- B. The switch port accepts LACP and PAgP packets from a connected peer and negotiate an EtherChannel using the common EtherChannel mode.
- C. The switch port passively negotiates an EtherChannel if it receives PAgP packets from a connected peer
- D. The switch port negotiates an EtherChannel if it receives LACP packets from a connected peer
Answer: A
NEW QUESTION # 66
Drag and drop the multicast concepts from the left onto the correct descriptions on the right.
Answer:
Explanation:
Explanation
1: PIM-DM 2:IGMP 3:PIM-SM 3:shared tree 4:source tree
NEW QUESTION # 67
An engineer implemented LDP protocol on the ISP network. The engineer must ensure that there are no packet loss issues when IGP and LDP protocols are not synchronized.
Which configuring must the engineer implement so that the IGP routing protocol will wait until LDP convergence is completed?
- A. Disable MPLS LDP IGP synchronization on the network.
- B. Configure LDP sessions protection on the network.
- C. Configure MPLS LDP IGP synchronization on the network.
- D. Disable IP CEF on routers running LDP and enable LDP protocol.
Answer: C
NEW QUESTION # 68
Drag and Drop Question
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right.
Answer:
Explanation:
Explanation:
Path Computation Element (PCE)
Represents a software module (which can be a component or application) that enables the router to compute paths applying a set of constraints between any pair of nodes within the router's TE topology database. PCEs are discovered through IGP.
Path Computation Client (PCC)
Represents a software module running on a router that is capable of sending and receiving path computation requests and responses to and from PCEs. The PCC is typically an LSR (Label Switching Router).
https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r5-3/mpls/configuration/guide/b- mpls-cg53x-crs/b-mpls-cg53x-crs_chapter_0110.html#con_1279822
NEW QUESTION # 69
Refer to the exhibit.
An engineer is configuring path selection on router R1 for two ASNs as shown. Which additional task must the engineer perform on Router 1 so that all outbound traffic utilizes the link between R1 and R3 to reach ASN 4567?
- A. Configure a low weigh! on the peer to ASN 4567.
- B. Configure an AS path prepend on the peer to ASN 4567.
- C. Configure a high med on the peer to ASN 4567.
- D. Configure a high weight on the peer to ASN 4567.
Answer: D
NEW QUESTION # 70
Which configuration modifies Local Packet Transport Services hardware policies?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
NEW QUESTION # 71
Drag and drop the OSs from the left onto the correct deceptions on the right.
Answer:
Explanation:
NEW QUESTION # 72
Refer to the exhibit:
Which statement about this configuration is true"?
- A. It requires an explicit Cisco MPLS TE path to be configured for the tunnel to run
- B. It requires OSPF to also be running to have optimized Cisco MPLS TE tunnels
- C. It requires a dynamic Cisco MPLS TE path to be configured for the tunnel to run
- D. It is the configuration for the head-end router of a Cisco MPLS TE tunnel with segment routing
Answer: D
NEW QUESTION # 73
Refer to the exhibit:
Which information is provided for traceback analysis when this configuration is applied?
- A. IP sub flow cache
- B. BGP version
- C. packet size distribution
- D. source interface
Answer: B
NEW QUESTION # 74
A network engineer is deploying VPLS configuration between multiple PE routers so that customer's remote offices have end-to-end LAN connectivity.
Which additional configuration should the engineer perform on the PE routers to enable the virtual switch instance?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 75
Drag and drop the technologies from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION # 76
What is the role of NFVI?
- A. intrusion detection
- B. domain name service
- C. monitor
- D. network address translation
Answer: C
NEW QUESTION # 77
Refer to the exhibit. A Cisco engineer is implementing gRPC dial-out on an ASR. Receiver
192.168 1.1 will be assigned one of the subscriptions, and it will manage the ASR. Which command is needed to complete the router configuration?
- A. protocol grpc
- B. protocol tcp
- C. protocol any
- D. protocol all
Answer: B
Explanation:
NEW QUESTION # 78
Refer to the exhibit.
A network engineer must implement SNMPv3 on a Cisco IOS XR router running BGP. The engineer configures SNMPv3 to use SHA for authentication and AES for privacy on the routers, which are in a different data center in the same exchange as other routers. The engineer must also verify the associated MIB view family name, storage type, and status. Which set of actions meets these requirements?
- A. Add configuration snmp-server user UserJustMe GrpMonitoring v3 auth sha AuthPass1 priv aes 128 PrivPass2 and use show snmp view to verify the configuration.
- B. Add configuration snmp-server user AuthUser group2 remote 10.1.1.1 v3 auth sha and use show snmp mib to verify the configuration.
- C. Add configuration snmp-server user AuthUser group2 remote 10.1.1.1 v3 auth sha and use show snmp engineid to verify the configuration.
- D. Add configuration snmp-server user UserJustMe GrpMonitoring v3 auth sha AuthPass1 priv 3des 128 PrivPass2 and use show snmp interface to verify the configuration.
Answer: C
NEW QUESTION # 79
How is a telemetry session established for data analytics?
- A. The destination initiate a session using the dial-out more to the router.
- B. A router requests the data using Teinet.
- C. A destination initiate a session to a router.
- D. A router initiates a session using the dial-out to a destination.
Answer: A
NEW QUESTION # 80
Refer to the exhibit:
Which condition must be met by the OSPF peer of router R1 before the two devices can establish communication?
- A. The interface on the OSPF peer may have a different key ID, but it must use the same key value as the configured interface
- B. The OSPF peer must use clear-text authentication
- C. The interface on the OSPF peer must use the same key ID and key value as the configured interface
- D. The OSPF peer must be configured as an OSPF stub router
Answer: C
NEW QUESTION # 81 
Refer to the exhibit. Router 4 is added to the network and must be in the same area as router 1. Which NET should the engineer assign?
- A. 49.0001.0000.0000.0004.00
- B. 49.0011.0000.0000.0002.00
- C. 49.0011.0000.0000.0003.00
- D. 49.0111.0000.0000.0001.00
Answer: C
Explanation:
Section: Networking
NEW QUESTION # 82
Which BGP attribute i5 used first when determining the best path?
- A. AS path
- B. weight
- C. local preference
- D. origin
Answer: B
NEW QUESTION # 83
Refer to the exhibit:
Based on the show/ command output, which result m true after BGP session is established?
- A. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192.168.2.2
- B. The IOS XR router advertises all routes to the neighbor 192.168.2.2, but it does not accept any routes from 192.168.2.2
- C. The IOS XR router does not advertise any routes to the neighbor 192.168.2.2,but it accepts all routes from 192.168.2.2.
- D. No routes are accepted from the neighbor 192.168.2.2, nor are any routes advertised to it
Answer: D
NEW QUESTION # 84
How is a telemetry session established for data analytics?
- A. A router initiates a session using the dial-out to a destination.
- B. A router requests the data using Teinet.
- C. The destination initiate a session using the dial-out more to the router.
- D. A destination initiate a session to a router.
Answer: A
NEW QUESTION # 85
Refer to the exhibit:
A network engineer is implementing an OSPF configuration Based on the output, which statement is true?
- A. OSPFv3 cannot be configured for IPv4; OSPFv3 works only for IPv6.
- B. IPv6 routing not enabled" is just an informational message and OSPFv3 runs for IPv4 on interface FastEthernet0/0 anyway
- C. OSPFv3 does not run for IPv4 on FastEthemet0/0 until IPv6 routing is enabled on the router and IPv6 is enabled on interface Fastfc.thernet0/0
- D. In the ospfv3 1 area 1 ipv4 command, area 0 must be configured instead of area 1.
Answer: C
NEW QUESTION # 86
......
Exam Requirements
Cisco doesn’t offer any prerequisites to fulfill before going for the 350-501 exam. However, the potential candidates have to possess a deep understanding of the topics before taking this path. Only this way, they will be able to cover all the questions and get the passing score. All in all, it will be easier for you to have the expertise in the following areas:
- at least 3 years of working experience in implementing service provider solutions (for the CCNP path);
- at least 5 years of working experience in deploying, designing, managing, and optimizing service provider technologies & solutions (for the CCIE path).
350-501 Exam Practice Materials Collection: https://www.examcost.com/350-501-practice-exam.html
Get Latest and 100% Accurate 350-501 Exam Questions: https://drive.google.com/open?id=19cYgQsMn5OT86pps7HhKnvsMz3tynuL6
