2025 201 exam torrent 201 Study Guide
Easily pass 201 Exam with our Dumps & PDF Test Engine
NEW QUESTION # 128
A BIG-IP Administrator sees the following error message in /var/log/ltm diskmonitor: *******; Disk partition shared has less than 30$ free Which section of the Configuration Utility should the BIG-IP Administrator access to investigate this error message?
- A. Statistics > Module Statistics > System
- B. System > Disk Management
- C. Statistics > Analytics
- D. System > File Management
Answer: B
NEW QUESTION # 129
A BIG-IP Administrator needs to determine which pool members in a pool have been manually forced offline and are NOT accepting any new traffic. Which status icon indicates this?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: C
NEW QUESTION # 130
A site needs a virtual server that will use an iRule to parse HTTPS traffic based on HTTP header values. Which two profile types must be associated with such a virtual server. (Choose two.)
- A. HTTPS
- B. ServerSSL
- C. HTTP
- D. TCP
Answer: C,D
NEW QUESTION # 131
A BIG-IP Administrator reviews the log files to determine the cause of a recent problem and finds the following entry.
Mar 27.07.58.48 local/BIG-IP notice mcpd {5140} 010707275 Pool member 172.16.20.1.10029 monitor status down.
What is the cause of this log message?
- A. The pool member has been marked as Down by the BIG-IP Administrator.
- B. The monitor attached to the pool member needs a higher timeout value.
- C. The pool member has been disabled.
- D. The monitor attached to the pool member has failed.
Answer: D
NEW QUESTION # 132
A virtual server is listening at 10.10.1.100:80 and has the following
iRule associated with it: when HTTP_REQUEST { if {[HTTP::uri] ends_with "txt" } { pool pool1 } elseif {[HTTP::uri] ends_with "php" } { pool pool2 } If a user connects to http://10.10.1.100/foo.html, which pool will receive the request.
- A. pool1
- B. Unknown. The pool cannot be determined from the information provided.
- C. pool2
- D. None. The request will be dropped.
Answer: B
NEW QUESTION # 133
When network failElover is enabled, which of the following is true.
- A. A network failure will not cause a failElover as long as there is a voltage across the failElover cable.
- B. The presence or absence of voltage over the fElo av iler cable takes precedence over network failElover.
- C. The failElover cable status is ignored. FailElover is determined by the network status only.
- D. Either a network failure or loss of voltage across the failElover cable will cause a failElover.
Answer: A
NEW QUESTION # 134
Which type of Virtual Server requires the use of a FastL4 profile?
- A. Performance (Layer 4)
- B. Standard
- C. Performance (HTTP)
- D. Stateless
Answer: A
NEW QUESTION # 135
A user needs to determine known security vulnerabilities on an existing BIG-IP appliance and how to remediate these vulnerabilities.
Which action should the BIG-IP Administrator recommend?
- A. Generate a view and upload to Heath
- B. Create a UCS archive and open an F5 Support request
- C. Create a UCS archive and upload to Health
- D. Verify the TMOS version and review the release notes
Answer: A
NEW QUESTION # 136
Assuming that systems are synchronized, which action could take place if the fail over cable is connected correctly and working properly, but the systems cannot communicate over the network due to external network problems?
- A. Whether or not network failover is enabled, the standby system will stay in standby mode.
- B. Whether or not network failover is enabled, the standby system will assume the active mode.
- C. If network failover is enabled, the standby system will assume the active mode.
- D. If network failover is enabled, the standby system will go into active mode but only until the network recovers.
Answer: A
NEW QUESTION # 137
A node is a member of various pools and hosts different web applications. If a web application is unavailable, the BIG-IP appliance needs to mark the pool member down for that application pool. What should a BIG-IP Administrator deploy at the pool level to accomplish this?
- A. A TCP monitor with a custom interval/timeout
- B. An HTTP monitor with custom send/receive strings
- C. A UDP monitor with a custom interval/timeout
- D. A combination of ICMP + TCP monitor
Answer: B
Explanation:
Explanation
Requiring all traffic to be HTTPS access requires HTTP requests to be redirected directly to HTTPS.
NEW QUESTION # 138
An ecommerce company is experiencing latency issues with online shops during Black Friday's peak season.
The BIG-IP Administrator detects an overall high CPU load on the BIG-IP device and wants to move the top utilized Virtual Servers to a dedicated BIG-IP device.
Where should the BIG-IP Administrator determine the problematic Virtual Servers?
- A. Local Traffic > Network Map
- B. Statistics > Module Statistics > Local Traffic > Virtual Servers
- C. Local Traffic > Virtual Servers > Virtual Server List
- D. System > Plattform
Answer: B
NEW QUESTION # 139
Refer to the exhibit.
Which two pool members should be chosen for a new connection? (Choose two.)
- A. 172.16.15.1.80
- B. 172.16.15.7.80
- C. 172.16.15.4.80
- D. 172.16.15.9.80
- E. 172.10.15.2.80
Answer: B,C
NEW QUESTION # 140
Which Virtual Server type prevents the use of a default pool?
- A. Standard
- B. Performance (Layer 4)
- C. Forwarding (IP)
- D. Performance HTTP
Answer: C
Explanation:
Forwarding (IP) cannot be associated with the pool.
NEW QUESTION # 141
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If a client were to initiate traffic to the NAT address, what changes, if any, would take place when the BIGElIP processes such packets.
- A. The destination address would not change, but the source address would be translated to the NAT's address.
- B. The source address would not change, but the destination address would be translated to the NAT's address.
- C. The source address would not change, but the destination address would be translated to the origin address.
- D. The destination address would not change, but the source address would be translated to the origin address.
Answer: C
NEW QUESTION # 142
Which two methods can be used to determine which BIG-IP is currently active? (Choose two.)
- A. The ifconfig a command displays the floating addresses on the active system.
- B. The bigtop command displays the status.
- C. The status (Active/Standby) is embedded in the command prompt.
- D. Only the active system's configuration screens are active.
Answer: B,C
NEW QUESTION # 143
A BIG-IP has a virtual server at 150.150.10.10:80 with SNAT automap configured. This BIG-IP also has a SNAT at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to the virtual server, what is the source IP address when the associated packet is sent to the pool member?
- A. 150.150.10.11
- B. Floating self IP address on VLAN where the packet leaves the system
- C. Floating self IP address on VLAN where the packet arrives on the system
- D. 200.200.1.1
Answer: B
NEW QUESTION # 144
What is the purpose of floating selfElIP addresses?
- A. to define an address that gives network devices greater flexibility in choosing a path to forward traffic
- B. to define an address that allows either system to initiate communication at any time
- C. to define an address that allows network devices to route traffic via a single IP address
- D. to define an address that grants administrative access to either system at any time
Answer: C
NEW QUESTION # 145
A site has six members in a pool. All of the servers have been designed, built, and configured with the same applications. It is known that each client's interactions vary significantly and can affect the performance of the servers. If traffic should be sent to all members on a regular basis, which loadbalancing mode is most effective if the goal is to maintain a
relatively even load across all servers.
- A. Ratio
- B. Round Robin
- C. Priority
- D. Observed
Answer: D
NEW QUESTION # 146
Users report that traffic is negatively affected every time a BIG-IP device fails over. The traffic becomes stabilized after a few minutes.
What should the BIG-IP Administrator do to reduce the impact of future failovers?
- A. Enable Failover Multicast Configuration
- B. Configure a global SNAT Listener
- C. Configure MAC Masquerade
- D. Set up Failover Method to HA Order
Answer: C
NEW QUESTION # 147
Which two can be a part of a pool's definition. (Choose two.)
- A. loadElbalancing mode
- B. monitor(s)
- C. rule(s)
- D. persistence type
- E. profile(s)
Answer: A,B
NEW QUESTION # 148
A VLAN has the following objects configured:
Self-IP 10.10.10.100 with port lockdown set to Allow default
Virtual server 10.10.10.100:443 with UDP profile enabled
Virtual server 10.10.10.0/24 port forwarding virtual server
Global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100 Which object will process this request when https://10.10.10.100 is entered into a browser?
- A. virtual server 10.10.100/24 port o forwarding virtual server
- B. self-IP 10.10.10.100 with port lockdown set to Allow default
- C. virtual server 10.10.10.100.443 with UDP profile enabled
- D. global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100
Answer: B
NEW QUESTION # 149
......
F5 201 (BIG-IP Administrator) Exam is an important certification exam for IT professionals seeking to demonstrate their expertise in administering BIG-IP systems. By passing 201 exam, candidates can prove their proficiency in managing and maintaining enterprise-level networks, as well as their ability to troubleshoot and resolve issues related to application delivery.
F5 201 (BIG-IP Administrator) Certification Exam is designed for IT professionals who are responsible for managing, configuring, and maintaining F5's BIG-IP Local Traffic Manager (LTM) products. BIG-IP Administrator Exam certification exam measures the candidates' understanding of the BIG-IP system, including its architecture, configuration, and management.
To prepare for the F5 201 certification exam, candidates are encouraged to take advantage of F5 Networks' training resources and study materials. This includes attending F5 Networks training courses, reviewing exam objectives and sample questions, and using F5 Networks' online training resources. By taking the time to prepare thoroughly for the exam, candidates can increase their likelihood of passing and earning this valuable and highly respected certification.
201 PDF Pass Leader, 201 Latest Real Test: https://www.examcost.com/201-practice-exam.html
Valid 201 Test Answers & 201 Exam PDF: https://drive.google.com/open?id=1YAueN9bk2Wyr5cKjrnphnwH20OQipx7L
