2024 Latest NSE6_FAZ-7.2 DUMPS Q&As with Explanations Verified & Correct Answers
NSE6_FAZ-7.2 dumps Exam Material with 32 Questions
To pass the Fortinet NSE6_FAZ-7.2 exam, candidates must demonstrate their proficiency in configuring and managing FortiAnalyzer 7.2, including its features and functionalities. They must also possess a deep understanding of network security concepts, protocols, and technologies. NSE6_FAZ-7.2 exam consists of 35 multiple-choice questions that need to be completed within 60 minutes. Candidates who pass the exam receive the Fortinet NSE 6 - FortiAnalyzer 7.2 certification, which is recognized globally and highly valued in the IT industry.
NEW QUESTION # 17
What is true about a FortiAnalyzer Fabric?
- A. The members send their logs to the supervisor.
- B. Supervisors support HA.
- C. Members events can be raised from the supervisor.
- D. The supervisor and members cannot be in different time zones
Answer: A
Explanation:
In a FortiAnalyzer Fabric, the FortiAnalyzer can recognize a Security Fabric group of devices, and it supports the Security Fabric by storing and analyzing logs from these units as if they were from a single device. The members of the Security Fabric group send their logs to the FortiAnalyzer, which acts as a supervisor for log storage and analysis, providing a centralized point of visibility and control over the logs.References:FortiAnalyzer 7.4.1 Administration Guide, "Security Fabric" section.
NEW QUESTION # 18
After you have moved a registered logging device out of one ADOM and into a new ADOM, you run the following command: execute sql-local rebuild-adom <new-ADOM-name> What is the purpose of running this CLI command?
- A. To migrate the archive logs to the new ADOM
- B. To populate the new ADOM with analytical logs for the moved device, so you can run reports
- C. To remove the analytics logs of the device from the old database
- D. To reset the ADOM disk quota enforcement to its default value
Answer: B
Explanation:
When you move a registered logging device from one ADOM (Administrative Domain) to another in FortiAnalyzer, it's essential to ensure that the analytical logs for the moved device are available in the new ADOM to maintain continuity in reporting and log analysis. The commandexecute sql-local rebuild-adom < new-ADOM-name>is used specifically for this purpose. Running this command populates the new ADOM with the analytical logs of the moved device, enabling you to generate accurate and comprehensive reports based on the historical data of the device in its new ADOM context. This process ensures that the transition of devices between ADOMs does not lead to a loss of analytical insight or reporting capabilities for the device's traffic and events.
NEW QUESTION # 19
Which two statements about FortiAnalyzer operating modes are true? (Choose two.)
- A. When in analyzer mode. FortiAnalyzer supports event management and reporting features.
- B. Analyzer mode is the default operating mode.
- C. For the collector, you should allocate most of the disk space to analytics logs.
- D. When in collector mode. FortiAnalyzer offloads the log receiving task to the analyzer.
Answer: A,B
Explanation:
The default operating mode for FortiAnalyzer is analyzer mode. In this mode, FortiAnalyzer provides full functionality for event management and reporting features. This mode is intended for environments where comprehensive analysis and reporting are required. It allows FortiAnalyzer to collect, analyze, and store logs, as well as generate reports and manage events.References:FortiAnalyzer 7.4.1 Administration Guide,
"Operating modes" section.
NEW QUESTION # 20
Which FortiAnalyzer command erases all device settings, images, databases, and logs on disk, but preserves The network configuration?
- A. executefactory-reset
- B. executeformatlogdisk
- C. executereset all-except-ip
- D. executeformat disk
Answer: A
Explanation:
The FortiAnalyzer commandexecute factory-resetis used to erase all device settings, images, databases, and logs on disk but preserves the current IP address and route information. This command effectively resets the FortiAnalyzer to its factory settings while maintaining its network configuration, allowing it to be quickly reconfigured with the same network settings.References:FortiAnalyzer 7.4.1 Administration Guide, "Reset Commands" section.
NEW QUESTION # 21
Refer to the exhibit.
Based on the partial outputs displayed in the exhibit, which devices are ready to be configured as peers in an HA cluster?
- A. FortiAnalyzer1 and FortiAnalyzer2
- B. These devices cannot participate in the same cluster.
- C. FortiAnalyzer2 and FortiAnalyzer3
- D. FortiAnalyzer1 and FortiAnalyzer3
Answer: B
Explanation:
Based on the provided exhibit, which shows partial outputs of the system status and global settings for FortiAnalyzer devices, the devices cannot be configured as peers in an HA (High Availability) cluster. This is indicated by the HA Mode status being set to 'Stand Alone' for the displayed FortiAnalyzer device. For devices to be part of an HA cluster, they would need to havecompatible HA configurations, and usually, they should not be in 'Stand Alone' mode. Additionally, the exhibit only shows information for one FortiAnalyzer, so it cannot be determined if there is another device ready to form an HA cluster with it.
NEW QUESTION # 22
Which statement is true when you areupgrading the firmware on an HA cluster made up of throe FortiAnalyzer devices?
- A. First, upgrade the secondary devices, and then upgrade the primary device.
- B. All FortiAnalyzer devices will be upgraded at the same time.
- C. Enabling uninterruptible-upgrade prevents normal operations from being interrupted during the upgrade.
- D. You can perform thefirmware upgrade using only a console connection.
Answer: A
Explanation:
In an HA cluster, the firmware upgrade process involves upgrading the secondary devices first. This approach ensures that the primary device can continue to handle traffic and maintain the operational stability of the network while the secondary devices are being upgraded. Once the secondary devices have successfully upgraded their firmware and are operational, the primary device can then be upgraded. This method minimizes downtime and maintains network integrity during the upgrade process.
When upgrading firmware in a High Availability (HA) cluster of FortiAnalyzer units, the recommended practice is to first upgrade the secondary devices before upgrading the primary device. This approach ensures that the primary device, which coordinates the cluster's operations, remains functional for as long as possible, minimizing the impact on log collection and analysis. Once the secondary devices are successfully upgraded and operational, the primary device can be upgraded, ensuring a smooth transition and maintaining continuous operation of the cluster.References:FortiAnalyzer 7.2 Administrator Guide - "System Administration" and
"High Availability" sections.
NEW QUESTION # 23
In a Fortinet Security Fabric, what can make an upstream FortiGate create traffic logs associated with sessions initiated on downstream FortiGate devices?
- A. The upstream FortiGate is configured to do NAT.
- B. The downstream device cannot connect to FortiAnalyzer.
- C. The traffic destination is another FoitiGate in the fabric.
- D. Log redundancy is configured in the fabric.
Answer: B
Explanation:
In a Fortinet Security Fabric, an upstream FortiGate may create traffic logs for sessions initiated on downstream FortiGate devices if the downstream device is unable to connect to FortiAnalyzer. This allows for continuity of logging and ensures that session logs are captured and stored even if the downstream device loses its connection to the log management system.References:FortiAnalyzer 7.4.1 Administration Guide, "Fortinet Security Fabric" section.
NEW QUESTION # 24
Which two statements are true regarding the log synchronization states for HA on FortiAnalyzer? (Choose two.)
- A. When Log Data Sync is turned on, the backup device reboots and then rebuilds the log database with the synchronized logs.
- B. With Initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device.
- C. By default. Log Data Sync is disabled on all backup devices.
- D. Log Data Sync provides real-time log synchronization to all backup devices.
Answer: B,D
Explanation:
For HA on FortiAnalyzer, Log Data Sync ensures real-time log synchronization among all cluster members, including backup devices. This feature is enabled by default. The Initial Logs Sync state is triggered when a new unit is added to an HA cluster, where the primary unit synchronizes its logs with the newly added unit.
After the initial synchronization, the secondary unit reboots and rebuilds its log database with the synchronized logs.References:FortiAnalyzer 7.2 Administrator Guide, "Log synchronization" section.
NEW QUESTION # 25
Which statement is true about using aggregation mode on FortiAnalyzer?
- A. Aggregation mode supports log filters.
- B. Aggregation mode can be configured only on the CLI.
- C. Aggregation mode can work with syslog servers.
- D. In aggregation mode, logs and content files are forwarded in real time.
Answer: C
Explanation:
In aggregation mode, FortiAnalyzer stores logs received from devices and forwards them at a specified time each day to avoid duplication. It is specifically designed to work between two FortiAnalyzer units and does not support syslog or CEF servers. Additionally, aggregation mode configurations are limited to CLI commandslog-forwardandlog-forward-service.References:FortiAnalyzer 7.2 Administrator Guide,
"Aggregation" and "CLI Commands for Aggregation Mode" sections.
NEW QUESTION # 26
Which two statements are true regarding fabric connectors? (Choose two.)
- A. Cloud-out connectors allow you to send real-time logs to public cloud accounts like Amazon S3.
- B. Using fabric connectors is more efficient than third-party polling information from the FortiAnalyzer API
- C. The storage connector service does not require a separate license to send logs to the cloud platform.
- D. Fabric connectors allow you to save storage costs and improve redundancy.
Answer: B,C
NEW QUESTION # 27
A rogue administrator was accessing FortiAnalyzer without permission.
Where can you view the activities that the rogue administrator performed on FortiAnalyzer?
- A. Log View
- B. System Settings
- C. Fabric View
- D. FortiView
Answer: D
Explanation:
To monitor the activities performed by any administrator, including a rogue one, on the FortiAnalyzer, you should use the FortiView feature. FortiView provides a comprehensive overview of the activities and events happening within the FortiAnalyzer environment, including administrator actions, making it the appropriate tool for tracking unauthorized or suspicious activities.References:FortiAnalyzer 7.4.1 Administration Guide,
"System Settings > Fabric Management" section.
NEW QUESTION # 28
Which process caches logs on FortiGate when FortiAnalyzer is not readable?
- A. oftpd
- B. miglogd
- C. sqlplugind
- D. logfiled
Answer: D
Explanation:
The processlogfiledin FortiGate units with an SSD disk is responsible for buffering logs when FortiAnalyzer is unreachable. If the connection to FortiAnalyzer is lost and the memory log buffer is full,logfiledallows logs to be buffered on disk. These logs are then sent to FortiAnalyzer once the connection is restored. This reliable logging mechanism ensures that logs are not lost during periods when FortiAnalyzer is not reachable, thereby maintaining log integrity and continuity.References:FortiOS 7.4.1 Administration Guide, "Log Buffering" and
"Reliable Logging" sections.
NEW QUESTION # 29
What areanalytics logs on FortiAnalyzer?
- A. Logs that roll over when the log file reaches a specific size
- B. Logs classified as type Traffic, or type Security
- C. Logs that are compressed and saved to a log file
- D. Logs thatare indexed and stored in the SQL
Answer: D
Explanation:
On FortiAnalyzer, analytics logs refer to the logs that have been processed, indexed, and then stored in the SQL database. This process allows for efficient data retrieval and analytics. Unlike basic log storage, which might involve simple compression and storage in a file system, analytics logs in FortiAnalyzer undergo an indexing process. This enables advanced features such as quick search, report generation, and detailed analysis, making it easier for administrators to gain insights into network activities and security incidents.References:FortiAnalyzer 7.2 Administrator Guide - "Log Management" and "Data Analytics" sections.
NEW QUESTION # 30
......
Fortinet NSE6_FAZ-7.2 exam is designed for individuals who want to validate their skills in administering FortiAnalyzer 7.2. FortiAnalyzer is a central logging and reporting solution that provides organizations with a holistic view of their network security. The NSE6_FAZ-7.2 exam is one of the most sought-after certifications in the cybersecurity industry, as it is specifically designed for Fortinet products.
Fortinet NSE6_FAZ-7.2 certification exam is an important credential for professionals who work with FortiAnalyzer 7.2. It demonstrates their expertise in managing and administering this critical security solution, and it can help them advance their careers by opening up new opportunities for employment and advancement. By passing NSE6_FAZ-7.2 exam, professionals can also help their organizations improve their security posture by ensuring that they have the skills and knowledge necessary to effectively manage their network security infrastructure.
Share Latest NSE6_FAZ-7.2 DUMP Questions and Answers: https://www.examcost.com/NSE6_FAZ-7.2-practice-exam.html
